Generally, when companies take on projects, they categorize the work and assign different construction teams accordingly. One of the more complex procedures in house demolition and construction is the removal of load-bearing walls. Since load-bearing walls are part of the structural walls, they support the house framework, and therefore must be handled by professionals to avoid potential collapses due to improper construction. Today, we'll introduce some key points to consider when removing load-bearing walls.

Analyze architectural plans and demolition drawings to determine construction steps. Always consult the architectural plans before removing load-bearing walls. These plans illustrate the overall structure of the building, and designers and contractors must discuss the demolition plan together to ensure that the removal will not affect the building's integrity. A building's seismic coefficient largely depends on the placement of load-bearing walls, and removing them can impact this coefficient. To minimize the impact, the overall balance of the building must be thoroughly considered during the demolition and reconstruction planning, especially for multi-story buildings, where the structure of adjacent units must also be taken into account to avoid affecting them. After analyzing various drawings, a comprehensive demolition plan must be determined, along with the construction sequence, to avoid issues such as unclear personnel assignments or construction direction during the construction process.

② Conduct safety warnings to prevent unintentional injuries. After the start of the demolition work on load-bearing walls, warning signs must be set up to inform non-essential personnel that construction is in progress here, and proper safety isolation measures should be taken to prevent unauthorized access and potential personal injuries. Construction workers should take adequate safety precautions, including wearing safety helmets and appropriate protective gear correctly, to avoid accidents or casualties due to inadequate protection during the construction process.

③ Handover and Inspection. After the demolition of load-bearing walls is completed, the work must be handed over to a designer or relevant department for inspection to ensure that the construction meets the design drawings and the overall structure is safe. Additionally, the construction site must be cleared.