详情描述

Lithium-ion Battery Powder Automatic Compaction Density Gauge, Mold with Detachable Module

Principle:

Lithium-ion power batteries have a significant impact on battery performance during the manufacturing process, with the compact density closely related to the specific capacity, efficiency, internal resistance, and cycling performance of the battery.

Higher compaction density, the battery capacity can be made with automatic powder compaction density meter 

The higher the value, the压实 density is also considered a reference index for the material's energy density.

Automatic Lithium Battery Powder Compaction Density Meter with Mold Self-removing Module

Application Scope:

During the compression process by external forces, as the powder moves and deforms, larger voids are filled, the contact area between particles increases, causing an attraction between atoms and strengthening the mechanical wedging between particles, thereby forming a dense and strong compact..

Reference Standard:1.GBT 24533-2009 Lithium-ion battery graphite anode materials, AppendixL:Testing Method for Powder Compaction Density

2.GB∕T 24533-2019 Lithium-ion battery graphite anode materials

Also suitable for the determination of compacted density of powders and granules with similar characteristics.

Function Description:

Hydraulic measurement system employed.7An inch touchscreen andPCSoftware control, the load unit control system collects stress change data, pressure and time data can be set, displacement is directly read by the displacement sensor, temperature and humidity data are obtained through sensors, multi-bit chip data analysis, automatic mode, manual operation mode available; Standard equippedPCThe software provides curves showing the relationship between stress and powder density; time and powder yield strength; as well as analysis and graphical representations of process data. This helps production enterprises and research institutions establish data models for developing and improving processes..Offer both Chinese and English versions.

Lithium-ion Battery Powder Automatic Compaction Density Gauge, Mold with Detachable Module

 Parameters and Specifications

Test Items

FT-100F

FT-100H

1.Main Pressure (Select)

5ton(s)10tons20ton

2ton;  3ton;  5ton

2.Displacement Measurement

Position Sensor System,Resolution0.001mm

3.Stroke

0-20mm

4. Control System

Hydraulic Control System

Servo Power System

5.Display Method

7Inch touchscreen+PCSoftware

6. Mold (optional)

A.Standard ConfigurationInternal Diameter:13mm； B.Optional inner diameter12.8mmHigh:25mm；Accuracy0.01mm

7.Molding release method

Automatic

8.Protective Device 

Automatic diagnostics, overload protection, and emergency stop control

9.Temperature and humidity range 

Room Temperature-50Temperature; Humidity:20%-98%

10.Time Setting

0-99.9S   ；0.1S

11.Equipment Management Function

PermissionSetup and Data Management Storage

12.Density Value 

99.99999g/cm3

13.Deformation variable

Measurable deformation of elastic materials0.01%----50%

14.Balance (Select)

0.00001gRange:120g

15.Displacement Speed

Less than15mm/minResolution0.1mm/min

16.Environmental Requirements

Instrument Usage Environment Requirements: Operating Temperature:-10℃－40Temperature: ℃, Humidity: ≤65%RH

17.Power Supply 

380v

18. Overall Error 

Samples vary in characteristics and density.≤3%

Different samples have varying characteristics and densities.≤1%

19.Selection Items

a. Extended Warranty Service; b. Measurement Services; c. Computers and Printers