Key Points for Maintaining and Servicing Four-Roller Plate Bending Machines

What are the key points for maintaining a four-roll plate bending machine? That's the issue we'll delve into for you today; take a look at the following detailed description:

Operate strictly in accordance with the safety operational procedures.

2. Prior to each start-up, adhere to the timing requirements of the clean data charts, conduct specified and quantitative analysis, and add clean oil. The oil must be free of sediment.

3. CNC lathes must be regularly maintained and cleaned, with some rust-preventive treatments using uncoated plant oils.

4. Regularly replace the clean oil in the motor bearings with fresh lubricant, and frequently check the safety and proper functioning of household appliances.

5. Schedule regular checks for the condition of the V-belts, levers, knobs, and function keys. Any damage found should be addressed immediately, with replacements made and a parts replenishment report submitted.

6. Schedule regular checks to repair power switches, ensure proper functioning, and secure joysticks, guaranteeing solid operation.

10 minutes before the end of each workday, oil and clean the CNC lathe for smooth operation.

8. Unauthorized personnel are strictly prohibited from operating the machinery. In the past, it was mandatory to ensure the operator is away from the machine when not in use.

The current theme is this, so if you have any other questions about the four-roll plate bending machine, feel free to give us a call for inquiries.