The blending and application of carbon nanomaterial SD7101 to the kneading machine,刮涂multiple times to avoid air bubbles, until slightly above the original size.
② Degrease the worn area of the kneader bearing position.
On the shaft diameter tolerance of the kneading machine, an additional 0.03-0.05mm is added.
④ Machine processing and surface repair of shafts.
⑤ Lathe alignment for coaxiality
⑥ Material curing, heat curing for 2 hours, then machine turning to the original shaft dimensions.
Pre-machine and roughen the bearing position of the kneading machine for wear parts.
News Center Co., Ltd.
