A submersible sewage pump has a drawback of being quite noisy. Do you know how to solve the issue of excessive noise in sewage pumps? Follow the submersible sewage pump editor below to learn more.

Each aircraft unit should have an individual foundation, with the pump foundation preferably being heavy and equipped with rubber vibration-damping pads for isolation, thereby reducing vibration and noise.

2. Flexible rubber joints and flexible rubber reducers should be installed on the suction and discharge pipes of the sewage pump. The number of shock-absorbing pipe components can generally be estimated based on the insertion loss of 15-20 dB per flexible rubber joint.

3. A water hammer eliminator should be installed on the water pipe.

4. Wastewater pump rooms should not be equipped with windows that directly face the window well.

5. Pipes and brackets connected to sewage pumps should be equipped with vibration isolation measures. Pipes passing through the ceiling or side walls of the pump room should be fitted with sleeves, and non-flammable flexible material should be filled between the sleeve and the pipe.

6. To reduce engine noise, it is recommended to prioritize the use of low-speed vertical pumps.

Here's an overview of some solutions to the issue of loud noise from submersible sewage pumps. We hope this information is helpful to you! For more related knowledge, feel free to call or visit our factory for inquiries!