HYDYOCOOLMoisture AbsorbentQuick-dryConditioner
HYDOCOOLEnhancing the Performance of Chemical Fibers:
1. Washable hydrophilic
2. Wash-resistant and easy to clean effect
3. Anti-static effect
HYDROCOOLThe fabric absorbs moisture from the body's sweat, rapidly conducting it to the fabric's surface, aiding fibers in more efficient continuous evaporation and heat exchange, creating a cool and comfortable sensation on the skin.
Product Composition:Ethoxy carboxylic compounds,Non-ionic
Application Field:Wicking, moisture-wicking finish for synthetic fibers, particularly polyester and blended fabrics, designed for durable washability and easy stain removal..Bestow fullness to the fabric.Soft.Smooth texture.
Nature:
Beige liquid
2Approximately 1.0 G/CM3 at 0°C
pH 4.5
Soluble in cold or warm water
Bestow high wash durability with hydrophilic properties and easy-to-clean effects.
Make color and oil stains easy to wash off
Provide a soft touch feelMICRO-TOUCHTouch Sensation
Improve the antistatic properties of synthetic fabrics
Enhance comfort during wear
Enhancing agent for dyeing ink used in dispersible dye printing paste
Convenient to use
Available for immersion and padding or dipping methods
Application:
FERAN ICSCan be applied in dip-coating or immersion processes.Do not use in bath with agents that have water-repellent effects.,Otherwise, it would reduce its hydrophilicity..For dyeing fabrics with poor sublimation fastness, it is recommended to use the immersion method.
Dipping and rolling process
10-60 G/L FERAN ICS
PHValue4.5-5.0(Acetic acid adjustment)
Flow Rate 30-60%
Drying Under normal circumstances
Dipping process
1-6% FERAN ICS(O.W.F)
PHValue4.5-5.0(Acetic acid adjustment)
Heat to 50-70℃
Response Time 20MIN
Drying Under normal circumstances
Enhancer for deepening color in printing paste
In the dispersible dye printing paste, add
10-40G/KG FERAN ICS
Significantly increases the color yield of printed fabrics, reducing dye consumption. We recommend a preliminary trial.FERAN ICSCompatibility with other components in the printing paste.
Note If mixed with fluorescent whitening agents for cellulose fibersThe performance of the fluorescent whitening agent will be affected, and the whiteness of the fabric will decrease after processing.
AdoptDuring FERAN ICS processing of polyester fabrics, it should not be used in the same bath as fluorescent whitening agents. However, separate baths can be used; otherwise, the performance of the whitening agents will be affected, and the whiteness of the treated fabric will decrease.
StorageIf stored below 0℃ or above 40℃, the product may solidify or change in viscosity. Simply heat it to 20-25℃ and stir before use.
If stored for an extended periodAbove 30℃; the product's viscosity may increase and solubility decrease. To avoid issues during application, thorough stirring or dissolving in warm water is necessary.
Please noteThe aforementioned materials are compiled based on our company's comprehensive research and accumulated experience in practical applications. We assume no responsibility for third-party intellectual property rights or German extraterritorial laws. Users must conduct their own tests to determine if this product and its application process meet their specific requirements. We assume no liability for uses and applications that have not been formally submitted in writing to our company.
