Under the editing state (EDIT) of the control device, input the machining program using the software and store it in the memory of the control device. This input method allows for the reuse of programs, commonly used in manual programming. On CNC devices with conversational programming capabilities, users can select different menus and CNC machining workflows by following the prompts on the display. By entering relevant dimension numbers through man-machine dialogue, the machining program can be automatically generated. The DNC (Direct Numerical Control) input method is used. The part program is saved on the host computer, and the CNC system receives subsequent program segments from the computer while processing.


Data and status checks for CNC system self-diagnosis not only display fault alarm information on the CRT monitor but also provide machine tool parameter and status information in the form of multi-page "diagnostic addresses" and "diagnostic data." Common data and status checks include parameter checks and interface checks.

Parameter checks for machine tool data in CNC machines are critical parameters obtained through a series of tests and adjustments, ensuring the normal operation of CNC machining companies. These data include gains, accelerations, contour monitoring tolerances, reverse clearance compensation values, and lead screw pitch compensation values. When subjected to external interference, CNC machining quotes can cause data loss or confusion, preventing the machine tool from functioning properly.


When using the sequential selection method, pay attention to the correct order of the tool placement in the tool magazine. Other selection methods also require attention to ensure the tool number being changed matches the required tool to prevent accidents caused by incorrect tool changes.

Maintain cleanliness of the handle and sheath of the knife.

Regularly check if the tool magazine's home position is correct, verify if the machine tool spindle's tool change point is in place, and adjust promptly; otherwise, the tool change operation cannot be completed.

At startup, for Suzhou CNC machining, the tool magazine and robotic arm should be run empty first to check if all parts are functioning properly, particularly the travel switches and solenoid valves for their normal operation.


CNC Machining Quotation - Suzhou CNC Machining - Pride Intelligent Technology, provided by Suzhou Pride Intelligent Technology Co., Ltd. The company offers services such as "CNC machining, mechanical processing, CNC lathe machining, etc." and has brands like "Pride." Focused on industries like hardware accessories, the company has a good reputation at No. 273 Jinling East Road, Suzhou Industrial Park. Please call for inquiries, contact: Manager Hu.