Glass Reinforced Plastic (GRP) Light-Transmitting Panels: Applications
Transparent Light-Transmitting Panels: Large-Scale Roof and Wall Lighting for Industrial Factory Buildings, Agricultural Greenhouse Insulation and Lighting, Large Storage Facilities, Supermarkets, Sports Venues, and Large Marketplaces.
New Corrosion-Resistant GRP Roofing Sheets: Widely used in fertilizer plants, chemical factories, paper mills, cement plants, ceramic factories, markets, and sewage treatment plants, as well as carports, bicycle sheds, and similar locations requiring corrosion and aging resistance.
OutperformingFRPPolycarbonate skylights are the ideal choice for buildings with particularly high light transmission requirements.FRPThe light panel has relatively poor light transmission, but typically...2mmAbove thick can be applied.20Over the years, with stable service life, the light transmittance will also increase with the thickness. If you wish to use it within a certain period,FRPSkylights are a great choice. AndFRPThe research and development of the lighting panels has been quite rapid, adding localized colors to provide consumers with more choices and a greater sense of aesthetics. As for the polycarbonate lighting panels andFRPSkylight panels, similar in function, also offer remarkable soundproofing properties. They exhibit superior sound insulation compared to glass and acrylic panels of the same thickness. Under the same thickness conditions, polycarbonate skylight panels have improved soundproofing capacity over glass.3—4DBOur company's materials are widely used as the raw material for highway noise barriers worldwide. Moreover, the outdoor temperature is0℃; Indoor temperature23℃; Indoor relative humidity below80At % humidity, the interior and exterior surfaces of the material do not condense, except for selection, it is also necessary to pay attention to some issues during the installation of the transparent light panels. During installation, the load-bearing capacity of the light panels should be considered, and they should be assembled on fixed supports. Good connections between the points, lines, and surfaces of the individual light panels are required during installation to avoid water leakage during rainy periods. If color steel panels are also used on the roof, the model should be different from the light panels, and attention should be paid to the direction of water flow to prevent leakage.
