Linear Sliding TableUtilizing a linear feed motion for finished workpieces, the device is sensitive and can be used both horizontally and vertically. It can operate as a single-axis unit or be combined with multiple axes. By installing different workpieces, it can accomplish various automated tasks, such as automatic transfer and detection. Machines like laser marking and cutting machines, which are commonly known, rely on it. As an essential sensor component of the linear slide, we generally refer to it as a limit switch, also known as a photoelectric switch. BelowModule Slide PlatformOur editor provides a detailed explanation of what the linear slide travel switch is used for.

The linear slider stroke switch, also known as a directional switch or limit switch, generally recommends that customers equip three inductive switches, one start switch, and two limit switches. The function of the limit switches is to...Linear ModuleWhen approaching the limit switch, stop immediately, but ensure a sufficient safety distance is maintained based on the speed. This allows the linear slide to safely come to a halt. Regarding the application of photoelectric switches, we must be aware of the issue of unstable voltage, which can lead to overvoltage damage. Therefore, we cannot share the power supply with the motor driver or other rational loads, otherwise, the reverse electromotive force generated by the motor or overloaded load will cause a significant fluctuation in voltage, which then burns out the photoelectric switch.

Linear slide travel switch in operation

One of the functions of the travel switch is the orientation constraint: generally, it converts mechanical displacement into electrical signals, altering the operation of the motor, enabling it to park, reverse, change speed, or cycle at predetermined travel distances, then control mechanical movement or perform safety maintenance. The other is the limit constraint, typically installed at both ends of a linear slide table. When the detection plate reaches the designated position, it will actively decelerate and park to prevent the reciprocating motion of the slide seat and workpiece from impacting the ends and causing issues.