Golf Cart Manufacturer - 2-Seater Golf Cart

Do not discharge golf carts with high currents; try to avoid sudden high current discharges. High current discharges can easily cause lead crystallization, thereby damaging the physical properties of the battery's plates.

Golf carts should control the charging time. Generally, the batteries are charged at night, with an average charging duration of about 8 hours. If the discharge is shallow (resulting in a short driving range after charging), the golf cart battery will quickly become full. Continuing to charge will lead to overcharging, causing the battery to lose water and heat up, thereby reducing its lifespan. Therefore, it is recommended to charge the battery once when the discharge depth is between 60% and 70%. In actual use, this can be converted into riding distance, and necessary charging should be performed based on the actual situation to avoid harmful charging.

Electric golf carts can save electricity and increase driving range. To save electricity with electric golf carts, pay attention to the following points:

Avoid rapid acceleration for electric golf carts starting.

Rapid acceleration can cause high currents in the high-voltage circuit. Frequent rapid starts can affect the lifespan of the motor controller and power battery, while also reducing the driving range.

Avoid abrupt stopping of electric golf carts

It is advisable to avoid sudden braking as it not only accelerates the wear of brake pads but also affects the motor controller due to the current feedback from emergency braking, which in turn impacts the driving range and the lifespan of the motor controller.

3. Maintain a stable driving speed for the electric golf cart

Under favorable road and traffic conditions, vehicles should maintain a steady driving speed. After starting and accelerating to a certain speed, it is appropriate to slightly release the gas pedal to maintain the current speed.

4. Maintain normal tire pressure for the electric golf cart

Golf Cart Path

1. The roadways must have sufficient load-bearing capacity, and their maintenance and repairs must be strengthened to ensure they do not compromise vehicle operation safety.

2. The vehicle's driving road must have visibility and be easy to maneuver; it must not include inclines, steep slopes, narrow passages, or low overhangs.

3. On roads where pedestrians or other vehicles may be encountered, the driving lane must be of sufficient width.

4. Suggested road gradients should not exceed 25%, and the transitions at the top and bottom of the slopes must be smooth to prevent vehicle bottom from hitting the road surface. When the gradient exceeds 25%, it is recommended to install signage. Caution must be exercised while driving in such conditions.

Tianjin Yigao Electric Vehicle Technology Co., Ltd. actively upholds the belief in humanistic technology with love, pursuing and growing amidst the rhythm of love and unity.