Specs and Parameters: (Customizable according to customer requirements)
Key Performance Advantages: Easy operation with trolley access. Please select the trolley style based on the characteristics of the baked products (see optional items).
Inner Dimension: See below chart (standard sizes; custom sizes available for customer's order)
Inner Material: Stainless Steel or Cold-Rolled Steel Sheet
Exterior Material: Cold-rolled steel or stainless steel plate, with surface coating (colors available, see optional items)
Frame: Channel steel angle steel overall frame
Insulation Material: High-temperature-resistant alumina-silicate wool
Bottom Load-bearing: Channel steel frame
Track: Channel track or I-beam track with external guide rail
Heating Tube Material: Far-infrared stainless steel sheathed heater (SHEATHED HEATER), capable of continuous operation for 70,000 to 80,000 hours.
Heating tube distribution: Evenly distributed on both sides of the case air ducts, top air duct, or bottom air duct, depending on the case size.
Airflow Method: Dual duct horizontal airflow or dual duct forced circulation airflow
Blower Motor: High-Temperature Resistant Long-Axis Motor and Multi-Wing Impeller
Motor Installation: Top, Side
Door latch: Aluminum alloy bearing hinge and top and bottom hook-type pull rod
Factory Accessories:
1. Flatbed Trolley / Multi-layer Trolley
2. Product Manual
3. After-Sales Maintenance Warranty Card
4. Product Compliance Certificate
5. Comprehensive Tool Kit
Optional Configurations: See Optional Items
Special specifications and special requirements can be customized as requested.
Performance Advantages: (Ongoing Improvement)
Blower SystemOptimized air duct design with a high-temperature-resistant fan motor and centrifugal blades, featuring strong turbo-style air circulation to eliminate dead spots. This ensures more even heat distribution inside the unit, greater energy efficiency, and quieter operation. It provides an excellent operating environment, with wind speed and pressure meeting test standards and complying with domestic environmental protection requirements. Some components offer high reliability and compatibility, with easy installation, maintenance, and repair.
Heating SystemUtilizing far-infrared heating technology, with high radiation efficiency and faster heating speeds. The heating tubes are evenly distributed, ensuring the system is completely independent without affecting the control circuit. Both temperature control and power are calculated by the computer, automatically adjusting the heating output power based on the internal temperature to meet precise electrical demands. This design is more environmentally friendly and energy-efficient.
Temperature Control SystemUtilizing a microcomputer digital display intelligent temperature controller with PID adjustment, featuring a digital timer relay, high accuracy, and clear visibility. It works seamlessly with solid-state relays to offer continuous adjustment capabilities. Once the temperature reaches the preset value, the relay accepts the controller's output signal source to control the temperature, ensuring it can only finely fluctuate within the PID temperature range for precise恒温 action. The circuit is equipped with an over-temperature protector, which immediately cuts off the control power in case of malfunction or operator error, thus ensuring the safety of the products inside. The over-temperature protector can be adjusted within the approved range.
Insulation EffectivenessExcellent thermal insulation technology, significant sealing effect, the exterior of the box maintains the normal indoor temperature, with minimal impact on the ambient temperature.
System ProtectionLeakage protection, circuit protection, short circuit protection, overload protection, phase sequence protection, over-temperature protection.
Electrical configuration: (Customizable according to customer requirements)
Thermostat:A set of intelligent digital temperature controller automatically regulates temperature with accuracy of 0.1-1 degree, featuring PID adjustment.
Time Setting Device:HS48S-99.99 Timer Device, featuring manual/automatic on/off, starts timing when the temperature reaches the set value, and cuts off the heating power supply once the set range is achieved.
Time-Alarm DeviceAPT/AD16 Sound and Light Alarm Device, immediate alarm upon setting time completion, manual termination alarm prompt.
Over-temperature alarm device:When the temperature exceeds the set value range, the protector immediately cuts off the control power supply.
Thermometer Device:A stainless steel PT100 platinum resistance temperature sensor for precise temperature measurement, and a stainless steel K-type platinum resistance temperature sensor for use with an over-temperature protector.
Circuit Breaker Activation:Circuit breakers with leakage protection for starting power, effectively protecting certain electrical components.
Contactor:PID+SSR (optional) output, precise temperature control accuracy, improves the stability of the temperature control components and interfaces, and extends their service life, ensuring uniformity of the internal temperature.
Current Voltage:220/380V, 50Hz, two-phase/three-phase four-wire and properly grounded.
Switches and indicator lights:Utilizing the Changtai brand, durable and customizable to customer's preference or specific brand.
Recorder:Paper or paperless recorder with USB, microcomputer integrated control system: available as per customer selection.
Equipment Operating Environment: (Please Note)
Installation Site:The ground is level, well-ventilated, with no intense vibrations around the equipment, no safety hazards, no strong magnetic fields nearby, no direct sunlight or other heat sources radiating directly, no high concentration of dust, and no corrosive, flammable, or explosive materials. Adequate space for use and maintenance must be left around the equipment.
Utilizing Pressure86-106Kpa
Environmental Requirements:Temperature range: -5 to 40 degrees, relative humidity: ±85% RH.
Power Source Used:Users must configure a separate air or power switch corresponding to the capacity of this equipment and properly connect the ground wire.
After-sales Service: (Caring for Customers with Dedication)
Warranty PeriodFrom the date of delivery, our company offers 12 months of full maintenance and warranty for this equipment, with lifetime repair and maintenance services.
Warranty Description:During the warranty period, any quality issues will be addressed with free repairs and replacement of parts. Outside the warranty period, replacement parts will be charged at the market cost price of the components only.
After-Sales Service:Our company received a customer service call for after-sales support. We respond within one hour. If the customer is unable to resolve the issue themselves, we will arrive at the customer's location within 24 to 72 hours, depending on the distance.
Service Support:Our company offers lifetime software upgrades and free technical support for the hardware components.
