Honglu Rubber & Plastic recommends high-performance hydraulic hose assemblies._News Consultancy Co., Ltd._Hebei Honglu Rubber & Plastic Products Co., Ltd. 
在线客服 在线客服邀请中...
关闭

您好,现在客服正邀请与您通话,请留下您的联系方式,客服将尽快与您取得联系。

 点击提交代表您同意《服务条款》《隐私政策》
Hebei Honglu Rubber & Plastic Products Co., Ltd.

Manufacture and sell products such as reinforced rubber hoses, steam hoses, l...

13932897866
 
News Category
  • No Category
Home > News Consultancy Co., Ltd. > Honglu Rubber & Plastic recommends high-performance hydraulic hose assemblies.
News Consultancy Co., Ltd.
Honglu Rubber & Plastic recommends high-performance hydraulic hose assemblies.
Publish Time:2022-03-26        View Count:19         Return to List

As various industries continue to evolve, a wide range of products, including high-pressure hoses, have seen further development and application. Consequently, an increasing number of users are opting for these products. However, many new users are unaware of how to choose a high-pressure hose suitable for their needs. Relevant personnel have provided the following explanation:

Professionals explain that when selecting high-pressure hoses, it is essential to choose the appropriate high-pressure hose, fittings, and hose assemblies based on the specific application. Considerations include: the type of high-pressure hose, its size, length, system operating pressure, system fluid, and the environment of use. Refer to product standards for selection guidance.

Additionally, under their introduction, we learned that there are various types of connectors for high-pressure hoses, and different connectors should be chosen for different types of high-pressure hoses. High-pressure hoses are categorized into two types: those that require the outer rubber to be stripped and those that do not. The connectors for the stripping type should not have too sharp grooves, as they may damage the reinforcing layer of the high-pressure hose. We hope that this knowledge can provide some assistance for your application.

Before installation, carefully inspect the high-pressure hose for any cracks and tap it with a mallet to listen for any dull sounds. If cracks and dull sounds are detected, installation and use are strictly prohibited. Additionally, verify that the spindle speed of the machine tool matches the high safety operating speed marked on the end of the high-pressure hose. When securing the high-pressure hose, only manual nut wrenches are allowed; the use of auxiliary clamps or striking tools is strictly forbidden. Also, during the tightening process, pay attention to the tightness of the nuts or screws, ensuring they are sufficiently tight to engage the high-pressure hose without causing slippage, but not so tight as to damage the hose.


 Click submit means you agree to《Service terms》《Privacy policy》

Phone Consultation

Consultation Phone:
13932897866