MVR Evaporator Manufacturer
Low-temperature crystallization evaporator
Triple-effect wastewater evaporator, Manufacturer of triple-effect evaporators
Multi-effect Falling Film Evaporator
Forced Circulation Evaporator, Three-effect Forced Circulation Evaporator Structure
Salt Containing Wastewater Evaporator - Evaporator Type
Multi-effect evaporator equipment
Product Details
产品Price Negotiable
最小起订Quantity： 供货总Quantity：
Does customization support? |
|
Specs |
Complete |
Shipment Time |
Based on product requirements |
Introduction:Vacuum drying involves heating and drying the material under vacuum conditions. If a vacuum pump is used to extract moisture, it accelerates the drying process. Note: If a condenser is used, the solvent in the material can be recovered through the condenser; if usingSK Series Water Ring Vacuum Pumps, capable of operation without a condenser, saving on energy investment. Product Overview: The YZG/FZG series vacuum dryers are static vacuum dryers. This drying equipment heats the material to be dried under vacuum conditions and uses a vacuum pump to exhaust air and moisture, keeping the working chamber in a vacuum state, significantly accelerating the drying rate of the material and also saving energy. If a condenser is used, the solvent in the material can be recovered through the condenser. If the solvent is water, a condenser is not required, saving energy investment. Equipment Features: 1. Under vacuum, the boiling point of the material solution is reduced, increasing the heat transfer driving force of the evaporator, thereby allowing for a reduction in the heat transfer area of the evaporator for a given heat transfer amount. 2. The heat source for the evaporation process can be low-pressure steam or waste heat steam. 3. The evaporator has minimal heat loss, enabling higher drying rates at lower temperatures with maximum heat utilization. 4. Capable of drying unstable or thermosensitive materials at low temperatures, as well as materials containing solvents and those requiring solvent recovery. 5. Disinfection can be performed before drying, ensuring no impurities from other works are mixed in during the drying process, in compliance with GMP standards. 6. Being a static vacuum dryer, the shape of the dried material will not be damaged. 7. Utilizing a condenser, it can effectively recover solvents from the material. Application Range: Low-temperature drying for thermosensitive materials prone to decomposition, aggregation, and deterioration at high temperatures, widely used in industries such as chemicals, food, and electronics. Technical Specifications Table: Specs YZG-600 YZG-800 YZG-1000 YZG-1400A FZG-10 FZG-15 FZG-20 Interior dimensions of drying cabinet (mm) φ600×976 φ800×1247 φ1000×1527 φ1400×2054 1500×1060× 1500×1400 1500×1800 External dimensions of the drying cabinet (mm) 1135×810× 1700×1045× 1693×1190× 2380×1675× 1924×1720 1513×1924 1924×2500 Oven Rack Layers 4 4 6 8 5 8 12 Spacing between layers (mm) 81 82 102 102 122 122 122 Pan Size (mm) 310×600×45 520×410×45 520×410×45 460×640×45 460×640 460×640 460×640 Number of baking trays 4 8 12 32 20 32 48 Internal pressure on the baking rack tube (MPa) ≤0.784 ≤0.784 ≤0.784 ≤0.784 ≤0.784 ≤0.784 ≤0.784 Holding Rack Temperature (℃) 35-150 35-150 35-150 35-150 35-150 35-150 35-150 Internal vacuum (MPa) when unloaded -0.1 -0.1 -0.1 -0.1 -0.1 -0.1 0.1 At -0.1 MPa, heating temperature 110°C 7.2 7.2 7.2 7.2 7.2 7.2 7.2 When using a condenser, please specify the vacuum pump model. 2X-15A 2KW 2X-30A 3KW 2X-30A 3KW 2X-70A 5.5KW 2X-70A 5.5KW 2X-70A 5.5KW 2X-90A 2KW Without a condenser SZ-0.5 1.5KW SZ-1 2.2KW SZ-1 2.2KW SZ-1 2.2KW SZ-2 4KW SZ-2 4KW SZ-2 5.5KW Dry Oven Weight (kg) 250 600 800 1400 1400 2100 3200 
YZG/FZG Series Vacuum Dryers
1220
×1220
×1220
1020
1335
1500
1920
×1513
×2060
× 1513
×45
×45
×45
At that time, the rate of water vaporization (kg/m²·hr)
Power (kw)
Vacuum Pump Model, Power (kw)
Phone Consultation