Concrete pipe laying often concerns the development of wear and tear. How should you handle and resolve the issue of wear during concrete pipe laying? Below, the editor from Tangshan Fengrun Xiangrui Concrete Pipe Factory provides a detailed explanation.

When concrete pipes need to pass through a floor, they should be set in place. If it's a thick floor, holes need to be drilled or pipes pre-buried. The hole diameter should be larger than the concrete pipe.
50 to 100 mm in diameter. When cement pipes are used as drainage pipes, they cannot be subjected to sedimentation, flue gas, and

Air pipeline approved. If cement pipes are to pass through these areas, it is recommended to promptly adopt the corresponding technical measures to prevent cement pipe cracking.
Split.

When laying reinforced concrete pipes, anti-corrosion treatment is required. The cement pipes must be fixed at a horizontal meter, with the horizontal spacing not exceeding...
3m. The pipe clips should also be mounted on the suspended collection brackets at the vertical joint. During the installation process of the concrete pipes.

Due to the varying specifications of cement pipes, installation requirements also differ, making them suitable for sample construction. In summary, there are discrepancies in all aspects.

The installation of cement pipes requires excavation and treatment of the foundation pit. Excavation and treatment are performed based on the required depth and pipeline specifications for the cement pipe installation.
After completing the foundation pit work, once the testing confirms that it meets the load-bearing requirements for the cement pipes, the installation can proceed.

Pour concrete. Pay attention to the flatness and pouring precautions during the concrete pouring process.

During the installation of concrete pipes, pay attention to the connection of the pipe joints to prevent improper or loose connections.