V-R2 Vertical 2-Station Turntable Series_SupplyPro Co., Ltd._V-R2 Vertical 2-Station Carousel Series, supplied,_Tianjin Yatai拓健 Plastic Machinery Equipment Co., Ltd._Zhongshang 114 Industry Resources Network

Round Vertical Injection Molding Machine55tons)
Special Dot:

1The rotating plate is designed for horizontal rotation (reverse rotation) only, as there is no up and down movement. It can be embedded at the same location, offering excellent and reliable performance. The rotation of the plate is driven by a hydraulic mechanism, ensuring smooth operation without any concern for the displacement of the embedded components.
2The positioning of the mold is fixed with a locking mechanism, ensuring easy and precise alignment of the hydraulic nozzle assembly and mold adjustment.
3Due to the molding product removal and insertion being performed at the molding station, operations are efficient. Moreover, it is easy to install automation equipment, utilizing DC solenoid valves and non-impact hydraulic feedback, resulting in low machine operation noise.

Technical Specifications:

Model	MODE	UNIT	YT-55TR-2C
*Injection System	INJECTION UNIT
Bolt diameter	Screw Poameter	mm	30	38
Material Pressure	Injection Pressure	Kgf/c	2057	1282
Theoretical Shot Volume	Injection Capacity	cm³	92	147
Large Injection Weight	Injection Weight(PS)	gr	83	133
Large Injection Weight	Injection Weight(PS)	oz	2.9	4.7
Injection type	Injection Rate	cm³/s	55	89
Screw rotation speed	Screw Speed	r.p.m	0~180
Screw Stroke	Screw Stroke	mm	130
Nozzle Stroke	Nozzle Stroke	mm	200
Nozzle top force	Nozzle Contact Force	tf	3.5
*Bolt mold system	CLAMPING UNIT
Mold Closing Method	Clamping System
Molding Force	Clamping Force	tf	55
Mold Closing Travel	Clamping Stroke	mm	200
Large space	Max.Nould Space	mm	280
Small, thick	Min.Nould Height	mm	180
Hydraulic Piercing Force	Hydraulc Ejector Force	tf	1.7
Punch needle stroke	Ejector Stroke	mm	35
*Disc System	TABLE DLAMETER
Disk diameter	Table Diameter	mm	1060
Disk rotation angle	Table Retatin Angle	º	180(Revolving continuously)
Large overall dimensions	Max.Mould Dimensions	mm	330×330
Mold Station Count	Numbe Of Molds	sets	2
*Electrical machinery others	ELETRICAL EQUIPMENTGENERAL
Electric Motor	Drive Notor	kw	7.5（10HP）
Electric Heating	Heater	kw	4.9
Mechanical dimensions	Dimenson Of Machine(LxWx)	m	2.5×1.7×3.3
Mechanical weight	Weight Of Machine	t	4
Packing Dimensions	Shipping Size(LxWx)	m	2.7×1.9×2.9
Packing Weight	Shipping Weight	kg	5000
Fuel Tank Capacity	Oil Tark Capacity	l	230
Cooling Water Volume	Cooling Water	l/hr	600~800

Round Vertical Injection Molding Machine85tons)

Special Dot:

1The rotating disc is designed for rotation (reverse rotation) at the same level only, as there is no up and down movement. It can be embedded at the same location, offering excellent performance and reliability. The rotation of the disc is driven by a hydraulic mechanism, ensuring smooth operation without concern for the displacement of the embedded components.

2The positioning on the mold is fixed, ensuring easy adjustment of the high-precision positioning hydraulic nozzle assembly and mold device in contact with the nozzle.

3Due to the mold station's handling of both removal and insertion of molded products, the operation is efficient and can easily be automated. It utilizes DC solenoid valves and non-impact hydraulic feedback, resulting in low machine operating noise.

Technical Specifications:

Model	MODE	UNIT	YT-85TR-2C
*Injection System	INJECTION UNIT
Screw diameter	Screw Poameter	mm	36	42
Feed pressure	Injection Pressure	Kgf/c	2176	1599
Theoretical Shot Volume	Injection Capacity	cm³	158	215
Large Injection Weight	Injection Weight(PS)	gr	141	194
Large Injection Weight	Injection Weight(PS)	oz	5	7
Injection type	Injection Rate	cm³/s	61	83
Screw rotation count	Screw Speed	r.p.m	0~180
Screw stroke	Screw Stroke	mm	155
Nozzle stroke	Nozzle Stroke	mm	200
Nozzle thrust	Nozzle Contact Force	tf	3.5
*Screw Die System	CLAMPING UNIT
Mold Closing Method	Clamping System
Clamping Force	Clamping Force	tf	85
Mold Closing Stroke	Clamping Stroke	mm	200
Large space	Max.Nould Space	mm	380
Mini-thick	Min.Nould Height	mm	180
Hydraulic piercing force	Hydraulc Ejector Force	tf	2.7
Spring Travel	Ejector Stroke	mm	35
*Disc System	TABLE DLAMETER
Disk diameter	Table Diameter	mm	1240
Disk rotation angle	Table Retatin Angle	º	180(Revolving continuously)
Large overall dimensions	Max.Mould Dimensions	mm	380×380
Mold Station Count	Numbe Of Molds	sets	2
*Electrical machinery, other	ELETRICAL EQUIPMENTGENERAL
Electric Motor	Drive Notor	kw	11.5（15HP）
Electric heating	Heater	kw	6.7
Mechanical dimensions	Dimenson Of Machine(LxWx)	m	2.6×1.9×3.7
Mechanical weight	Weight Of Machine	t	5.8
Packing Dimensions	Shipping Size(LxWx)	m	2.8×2.1×3.1
Packing Weight	Shipping Weight	kg	6800
Fuel Tank Capacity	Oil Tark Capacity	l	260
Cooling Water Volume	Cooling Water	l/hr	800~1000

Tianjin Yatai拓健 Plastic Machinery Equipment Co., Ltd.

V-R2 Vertical 2-Station Turntable Series

Business Card

买家正在看

18622972888

24h Online Service