One: The ironwork railing is horizontally installed according to the provided standard line.
II. Iron Art Fence Installation Process:
Upon arrival at the construction site, the products are installed accurately according to the specified locations and dimensions on the drawings. The elevation and levelness are confirmed. The positioning should be in accordance with the client's requirements and the design specifications, ensuring compliance with the design requirements and acceptance standards.
2. Pre-fabricated components are installed accurately according to the design requirements of the drawings and the actual conditions of the construction site, ensuring alignment on a single parallel line.
3. The iron art fence installation is performed by copying the provided standard line for horizontal positioning, with pre-buried spacing based on on-site dimensions and design requirements, ensuring proper installation alignment.
4. Installation deviations must comply with national regulations and design requirements, achieving the acceptance standards.
5. Pre-embedded components and ironwork railing installations must be securely fastened. Installation tolerances are in accordance with national regulations and design requirements: straightness < 3mm, perpendicularity < 3mm, railing spacing tolerance < 3mm, diagonal tolerance < 3mm, pre-embedded component perpendicularity < 3mm, and horizontal tolerance < 3mm.
6. Pre-installed components are installed with precise location, and after acceptance, they are coated with two layers of anti-rust paint before the ironwork railing installation takes place.
