- AllProduct Category
-
High Voltage Isolation Disconnect Series
High-Voltage Silicon Rectifier Transformer Series
High-Voltage Power Series
High Voltage Isolation Switch Box Series
Electrostatic Dust Removal Controller
Dust Collector Series
Insulating Porcelain Components
Top Drive Side Impact Device
Cathode Ray Series
Pneumatic Conveying System
Dust Collector Additional Parts


详情描述
GGaj02H Series High-Voltage Silicon Rectifier Transformer

Product Advantages
Utilize dual spark detection and control technology with both hardware and software.
Automatically and rapidly plot a family of dynamic voltage-ampere curves for the electric field.
Capture and store voltage and current waveforms;
Features power reduction impact control function;
Features anti-corona control function;
Robust network system control, forming a powerful subsystem.
User-friendly human-machine interface.
Multiple control methods
Spark Trace Control
Average voltage control
Spark Rate Setting Control
Critical Spark Limit Control
Dual half-wave intermittent power supply control
Single half-wave intermittent power supply control.
Features special protective functions
Overcurrent protection;
Overload short-circuit protection
Open Circuit Fault Protection
Hazardous Oil Temperature Protection
SCR Short Circuit Protection
Pole excitation protection
Under-voltage protection
Features special overvoltage voltage limiting and overload current limiting measures.
Product Features
Transformer usage environment temperature should not exceed +40℃ and should not be lower than the freezing point specified for transformer oil.
2. Relative humidity not exceeding 90% (at air temperature of 20±5℃).
3. There should be no conductive dust or gases containing corrosive metals or insulating materials present around the equipment.
4. Explosion-proof hazard-free in compliance with the following specifications: sine wave form, frequency of 50Hz, fluctuation range not exceeding ±2%, voltage of 380V, amplitude variation not exceeding ±55, and instantaneous fluctuation range not exceeding ±10%.
5. The dust collector's grounding resistance is less than 2Ω.
询价单












