详情描述

Product Specifications

Model: YT-9240E(GD)

Brand: Yingten

Dehumidification Rate (Condition: 90% RH, 30℃): 10 kg/h

Power: 380V/50Hz

Input Power: 4200W

Defrosting Method: Automatic Defrost

Airflow Rate: 2800 m³/h

Drainage Method: Hose Drainage

Airflow Direction: Front Delivery, Rear Intake

Operating Temperature: 5-38℃

Weight: 115 kg

Dimensions: Length 1100mm, Width 700mm, Height 700mm


Note: Customizable explosion-proof models available. Please note that the above technical specifications are subject to change without prior notice; the actual machine is to be considered as the standard!

Automatic humidity control dehumidifiers with settings from 10%-90% humidity, no need for staff supervision; once set, they run automatically (the dehumidifier turns on to remove moisture when humidity is too high, and switches to standby mode when humidity reaches the set point). Achieving user-friendly, fully automatic control with high efficiency and energy saving.

The machine's humidity control switch can be isolated and placed at any convenient location for the user to control and observe in real time.

Multiple protections: The unit is equipped with overloads, short circuits, phase loss, overheating, high voltage, low voltage, and other protections.

Machine features automatic fault detection. In the event of a fault, the machine will automatically detect the cause and display the corresponding fault code for easy maintenance.

Utilizing internationally renowned brand compressors, powerful performance, and effective dehumidification.

The dehumidifier is designed with an automatic defrosting feature. When the temperature drops below 18°C, it may frost over. To ensure optimal operation, an automatic frost detection and defrosting function has been added to guarantee normal use in low temperatures.

Ceiling Dehumidifier Principle

Based on standard dehumidifiers, we enhance the configuration, adjusting and increasing air volume and pressure. The intake and exhaust are connected via flanges to ducts, drawing moist indoor air into the machine through the site's piping for processing. The dried air is then returned to the room, thus achieving the dehumidification goal through this cycle.