详情描述

Inten Explosion-Proof Cold (Hot) Water UnitProduct Specifications

Spec: 1 horsepower

Brand: YingTeng

Cooling Capacity: 2.7 kW (2.3 x 10^3 kcal/h)

Power: 220V/1ph/50Hz

Total Power: 1.2 kW

Rated Current: 5.9A

Compressor Type: Rotational

Power: 0.8 kW

Pump Power: 0.25 kW

Flow Range: 34m

Flow Rate: 0.46 m³/h (7.7 L/min)

Tank Capacity: 20L

Assume Pipe Size DN20

Noise: 58 dB(A)

Engineered Weight: 68 kg

Dimensions: Length: 500mm, Width: 500mm, Height: 950mm

Ex db ib mb IIB T4 Gb / Ex db ib mb II CT4 Gb

Note: The above technical specifications are for reference only; the actual product should be used as the standard.

The above cooling capacity is based on an ambient temperature of 35°C, an incoming water temperature of 12°C, and an outgoing water temperature of 7°C.

Customizable -5°C Air-Cooled Low-Temperature Industrial Chiller, -15°C Air-Cooled Low-Temperature Industrial Chiller, -35°C Air-Cooled Low-Temperature Industrial Chiller

Manufacturer: Henan Tongteng Explosion-proof Electrical Equipment Co., Ltd.


YingTeng Explosion-proof Cold (Hot) Water Chiller UnitThe series products comply with the following standards:

GB/T 3836.1-2021 "Explosive Atmospheres *Part 1: Equipment General Requirements"

GB/T 3836.2-2021 "Explosive Atmospheres – Part 2: Equipment protected by explosion-proof enclosures 'd'"

GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"

GB/T 3836.9 - 2021 "Explosive Atmospheres - Part 9: Equipment protected by "m" type enclosures"

GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"

YingTeng Explosion-Proof Cold (Hot) Water Chiller UnitOperates normally under the following environmental conditions:

a) Altitude not exceeding 2,000m

b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.

c) There are explosive hazard areas formed by mixtures of flammable gases, vapors from Groups II A, II B, and T1 to T4, with air.

YingtengExplosion-proof Cold (Hot) Water Chiller UnitSeries models are processed with special explosion-proof technology, suitable for widespread use in flammable and explosive areas of Zones 1 and 2, and are widely applicable in scientific research, oil, chemical industry, pharmaceuticals, power plants, and other locations where there may be or could be hazardous explosive mixtures of II A, II B groups of combustible gases, steam, and air, ranging from T1 to T4.Explosion-proof Cold (Hot) Water Chiller UnitFor facilities requiring temperature control.Explosion-proof Cold (Hot) Water Chiller UnitInspected and certified by the National Explosion-Proof Electrical Products Quality Supervision and Inspection Center with explosion-proof and CCC certification; featuring an aesthetically pleasing design, reasonable structure, and ease of installation and maintenance, the full range ofExplosion-proof Cold (Hot) Water UnitInternally equipped with brand-name compressors, microcomputer intelligent control, digital display, featuring low noise, stable performance, simple operation, and safety reliability, it is highly favored by the market. (Customizable options include explosion-proof window-type air conditioners, explosion-proof duct-type air conditioners, explosion-proof ceiling-mounted air conditioners, explosion-proof fresh air air conditioners, explosion-proof marine air conditioners, explosion-proof corrosion-resistant air conditioners, explosion-proof high-temperature air conditioners, explosion-proof cold storage air conditioners, explosion-proof modular air conditioning units, and explosion-proof multi-split air conditioning units, etc.).

Inten Explosion-Proof Chilled (Hot) Water UnitProduct Features

International brand compressor, optimized rotor structure, stable quality, reliable operation.

External expansion valve, precise control, excellent refrigeration effect.

High-efficiency heat exchangers with superior heat transfer performance, featuring a unique design of cold and hot cycle partition plates.

High-quality liquid storage unit, optimizes system operation, stable working condition.

High airflow, low noise, external rotor series axial flow fans, powerful airflow.

High-head, low-noise stainless steel water pumps from international brands, with stable quality.

High-efficiency internally threaded tube finned heat exchangers with a unique turbulent window design for enhanced heat exchange efficiency.

Microcomputer-based controller with analog input/output, for precise control of the unit's temperature.

YitingExplosion-proof Cold (Hot) Water Chiller UnitComprehensive series, developed through years of industry experience and continuous optimization, offering a range of high-quality chillers. The entire series utilizes internationally renowned brands such as Copeland, Danfoss, Panasonic, Daikin compressors, including scroll, reciprocating, screw, semi-hermetic, and hermetic types. The units are equipped with high-efficiency copper tube fins, industrial stainless steel condensers and evaporators, materials reaching the highest industrial food-grade standards. Electrical components are from world brands like Siemens, Schneider, and ABB. Reliable quality and exceptional performance. The Yinteng explosion-proof chillers feature compact size, low noise, high energy efficiency, long lifespan, and easy operation. A variety of refrigerants are available for selection, catering to low-temperature and special environment requirements.

The cold water machine control section utilizes a high-precision main control panel developed by Yingten, a PLC programmable controller, a human-machine interface, and full Chinese display. It enables full-process, fully automatic computerized adjustment and control, making the unit control more precise and reliable.

YingTengExplosion-proof Cold (Hot) Water Chiller UnitCompact structure, small footprint, lightweight, easy to transport. Balanced operation for safety, low vibration, no need for complex foundations, easy installation. Automatic protection features: high/low pressure protection, compressor protection, motor overload/overheat protection, frost protection, cold water/cooling water shutdown protection, temperature-sensitive fusible plug, safety valve.