Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinnan Road, Economic and Technological Development Zone, Heze City. With a registered capital of 50 million yuan and total assets of 500 million yuan, the company operates seven business centers: boilers, deep-freeze containers, pressure vessels, central air conditioning, engineering installation, international trade, and Internet of Things. It has three factory sites on Jinnan Road, East Changjiang Road, and Bohai Road, covering a total area of 200,000 square meters, with the main workshop spanning 83,000 square meters. The company currently employs 710 staff, including 247 engineering and technical personnel and 82 middle-level technicians. In December 2016, it was recognized as a "High-tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise in Shandong Province" by the Industrial and Information Technology Department. In June 2022, it was recognized as a "Gazelle Enterprise in Shandong Province" and in August 2022, it was identified as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
The management system for gas heat-conducting oil furnace equipment mainly includes the following aspects: 1. Equipment Safety Management System: Establish and improve the safety management system for gas heat-conducting oil furnace equipment, define responsibilities and authorities, and ensure the safe operation of the equipment. This includes equipment operation procedures, emergency response plans, and equipment inspection and maintenance schedules. 2. Equipment Maintenance Management System: Establish a maintenance management system for the equipment, clearly define maintenance responsibilities and plans. This includes regular equipment inspections, maintenance, and repairs to ensure the normal and safe operation of the equipment. 3. Equipment Operation Management System: Establish an operation management system for the equipment, clearly define operation procedures and requirements. This includes procedures for equipment start-up, shutdown, adjustments, and monitoring to ensure the safety and operation of the equipment. 4. Equipment Accident Management System: Establish an equipment accident management system, clearly define reporting, investigation, and handling procedures for accidents. This includes reporting requirements for equipment accidents, accountability, root cause analysis, and improvement measures to reduce accidents and minimize losses. 5. Equipment Training and Assessment System: Establish a training and assessment system for equipment to ensure operators have the necessary skills and knowledge. This includes equipment operation training, safety training, and technical training, as well as regular assessment and evaluation of operators. 6. Equipment Inventory and Record Management System: Establish an inventory and record management system for the equipment to record operation conditions, maintenance records, and accident records. This includes equipment inventory management, maintenance record completion and storage, and accident record compilation and analysis for equipment management and issue tracing. The above is some basic content of the management system for gas heat-conducting oil furnace equipment incidents. Specific management systems need to be formulated and improved based on actual circumstances. At the same time, relevant laws and regulations and standards must be adhered to to ensure the safety and environmental performance of the equipment.

Yes, durable thermal oil boilers generally have a longer lifespan. Here are some reasons: Material Quality: Thermal oil boilers are made from materials such as high-temperature and corrosion-resistant steel and alloys. These materials can withstand high temperatures and pressure, offering good durability and corrosion resistance, thereby extending the boiler's lifespan. Design and Manufacturing Process: Long-lasting thermal oil boilers often feature specific design and manufacturing processes. Reasonable structural design and precise manufacturing techniques can reduce stress concentration and thermal stress, enhancing the boiler's stability and durability. Regular Maintenance and Care: Regular maintenance and care of thermal oil boilers are crucial for extending their lifespan. Regularly cleaning and inspecting the internal pipes, flues, and burners, and promptly replacing worn-out parts, can minimize malfunctions and damage, thereby extending the boiler's life. Proper Operation and Management: Correct operation and management are also vital factors in ensuring the lifespan of thermal oil boilers. Operators should follow the operation manual and procedures, avoiding overload operation and improper handling, to ensure safe and stable boiler operation. It is important to note that even durable thermal oil boilers require regular inspections and maintenance to ensure proper operation and lifespan extension. Moreover, the lifespan of the boiler is influenced by factors such as the operating environment, load conditions, and operation methods. Therefore, proper use and maintenance are key to ensuring the lifespan of thermal oil boilers.

The inspection content and requirements for gas boilers typically include the following aspects: Safety Valve and Pressure Gauge: Check the installation and fastening of the safety valve and pressure gauge to ensure their normal operation and accurate pressure display. Combustion System: Inspect the operating status of the burner, including ignition, combustion, and combustion stability. Check the connections of the gas supply pipes and valves to ensure no leaks. Chimney and Heat Exchanger: Inspect the cleanliness of the chimney and heat exchanger, checking for accumulated dust and dirt, to ensure heat exchange efficiency and smoke emission meet requirements. Water Level Control System: Check the operating status of the water level controller and gauge to ensure accurate and reliable water level control, preventing overfilling or low water levels. Gas Supply System: Inspect the installation and connections of the gas supply pipes and valves to ensure normal gas supply and no leaks. Electrical System: Check the wiring and connections of the electrical system, including power supply, controllers, and sensors, to ensure normal operation of electrical equipment and avoid electrical faults. Safety Devices: Inspect the operating status of safety devices, including safety valves, pressure switches, and temperature controllers, to ensure their normal operation and ensure safe boiler operation. Records and Documents: Review the boiler's operating records, maintenance records, and inspection reports, ensuring the completeness and accuracy of the operating and maintenance records. The inspection of gas boilers should be carried out by an institution or personnel with the corresponding qualifications, in accordance with relevant laws, regulations, and standards. The frequency and specific requirements of the inspection can be determined based on the boiler's usage and local regulations. Timely inspections and maintenance can ensure the safe operation and performance of gas boilers.

Proper selection of a thermal oil furnace requires considering the following aspects: 1. Heat Load Demand: First, determine the required heat load for the thermal oil furnace, which is the heat energy needed to be supplied. Establish the rated power and heat load range of the furnace based on actual requirements to ensure it can meet the necessary heat energy supply. 2. Operating Temperature and Pressure: The operating temperature and pressure range of the thermal oil furnace must match the actual application scenario. Choose the appropriate temperature and pressure range based on process requirements and working environment to ensure stable operation of the furnace. 3. Thermal Oil Type: Select the appropriate type of thermal oil based on process requirements and working environment. Common types include silicone thermal oil, organic thermal oil, and mineral oil thermal oil, each with different operating temperature ranges and performance characteristics, so choose according to actual needs. 4. Equipment Quality and Reputation: Choose a supplier with a good reputation and quality thermal oil furnaces. Ensure the manufacturing process and material quality are reliable, providing stable performance and after-sales service. 5. Safety and Environmental Protection: The safety and environmental protection of the thermal oil furnace are important considerations. Choose a furnace with safety protection devices and environmental certifications to ensure safety for personnel and equipment during operation. 6. Cost-effectiveness and Energy Efficiency: Consider the cost-effectiveness and energy efficiency of the thermal oil furnace. Choose a furnace with high energy efficiency and energy-saving features to reduce energy consumption and operating costs. By considering all these factors and selecting the appropriate thermal oil furnace based on actual needs, you can ensure the stable operation of the equipment.
ZJ Special Equipment adheres to the great vision of "realizing employees' dreams, creating value for customers, and striving for the prosperity and strength of our motherland," wholeheartedly committing to the development of green energy equipment. We dedicate high-value products and services to society!