Shandong Zhongjie Special Equipment's main products include: fuel (gas) boilers, organic heat carrier boilers, biomass boilers, waste heat boilers, and other boiler products; vacuum insulation cryogenic pressure vessels such as LNG tanks, oxygen/nitrogen/argon tanks, CO2 tanks; pressure vessel products like denitrification engineering equipment, heat storage and energy storage equipment, complete chemical equipment; central air conditioning and ventilation equipment such as ground (water) source heat pumps, air source units, water-cooled screw units, and air-cooled modular units. Planned products include large-scale energy centers, LNG transport vehicles, LNG tank containers, and other green energy equipment.
Excessive exhaust gas temperature in a thermal oil boiler may be due to several reasons: Incomplete combustion: If the fuel is not fully combusted during the boiler's combustion process, it leads to a high concentration of unburned fuel and harmful substances in the flue gas, raising the exhaust gas temperature. Possible causes include insufficient fuel supply, incorrect burner adjustment, and wear on the burner. Excessive air: An excess of air can lower the combustion temperature, making it insufficient to reduce the flue gas temperature to a reasonable level. Causes may include incorrect burner adjustment and overly open air doors. Flue blockage: Accumulated soot, coking, or other impurities in the flue can obstruct flue gas flow, increasing the residence time of the gas and raising the exhaust gas temperature. Abnormal thermal oil flow: An abnormal flow of thermal oil, either too high or too low, can cause uneven heat transfer, leading to an increase in flue gas temperature. Overheating of the boiler: Improper temperature control in the thermal oil boiler can lead to overheating, increasing the exhaust gas temperature. Design issues: Design problems such as a narrow flue or poor flue gas flow can also result in high exhaust gas temperatures. To address the issue of high exhaust gas temperature, a comprehensive inspection and analysis of the thermal oil boiler is required. Solutions may include adjusting burner parameters, cleaning the flue, checking thermal oil flow and temperature control. In severe cases, boiler system modifications or repairs may be necessary. Additionally, regular maintenance and inspections are crucial preventive measures against high exhaust gas temperatures.

The Zhongjie Portable Heat Transfer Oil Furnace is a common industrial thermal energy equipment featuring the following product characteristics: High thermal efficiency: The Zhongjie Portable Heat Transfer Oil Furnace utilizes advanced combustion technology and heat exchanger design, effectively transferring the heat energy generated by fuel combustion to the heat transfer oil, achieving high energy utilization and improving thermal efficiency. Stable and reliable: Made with materials and precision manufacturing processes, this furnace boasts excellent high-temperature resistance and stable operating conditions, ensuring long-term stable operation with high reliability. Temperature control: Equipped with a temperature control system, the Zhongjie Portable Heat Transfer Oil Furnace can monitor and adjust the temperature of the heat transfer oil in real-time, guaranteeing precise and stable temperature control during the process. Safety protection: The furnace is equipped with multiple safety protection devices, such as overheat protection, pressure protection, and burner fault protection, effectively preventing accidents. Additionally, the furnace utilizes clean combustion technology, producing minimal emissions and being environmentally friendly. Easy operation: The Zhongjie Portable Heat Transfer Oil Furnace features an intelligent control system with a user-friendly interface, easy parameter adjustment, and simple operation, reducing operation difficulty and labor costs. Overall, the Zhongjie Portable Heat Transfer Oil Furnace is characterized by stability, reliability, and versatility, suitable for various industrial fields such as chemicals, textiles, and food processing, providing users with reliable thermal energy supply and process temperature control.

Industrial boiler thermal deaeration is a commonly used deaeration method, featuring: - Deaeration: Thermal deaeration involves heating the boiler feed water to release dissolved oxygen from the water using heat. As the water temperature increases during the thermal deaeration process, the solubility of oxygen decreases, allowing for effective removal of oxygen from the water. - No Chemicals Required: Unlike other deaeration methods, thermal deaeration does not require chemicals, thus avoiding environmental pollution and equipment corrosion caused by chemicals. It also reduces operational costs and complexity. - Automated Control: Thermal deaeration can be achieved through an automated control system, which adjusts the feed water temperature and flow rate based on the boiler's operating conditions and water quality to achieve optimal deaeration results. - Wide Application Range: Thermal deaeration is suitable for various types of industrial boilers, including coal-fired, gas-fired, and oil-fired boilers. Whether it's a small or large boiler, thermal deaeration can be used for deaeration treatment. - Improved Boiler Efficiency: Removing dissolved oxygen from the water can reduce corrosion and oxidation reactions within the boiler, extending its service life. Additionally, reducing oxygen presence can enhance the boiler's thermal efficiency and lower energy consumption. - Note: While thermal deaeration effectively removes oxygen from the water, it may not address other water quality issues such as hardness and alkalinity. Therefore, in practical applications, it's necessary to consider the characteristics of water quality and the requirements of the boiler to select an appropriate deaeration method.

When installing a gas boiler system, the following points should be noted: Safety: A gas boiler is a device that uses gas as fuel, so safety must be ensured during installation. First, select an appropriate installation location, far from flammable materials and combustible gases, and ensure good ventilation. Second, install according to relevant safety regulations, including the connection of gas pipes and the installation of gas valves. Pipe Connection: The gas boiler needs to be connected to the gas pipeline to ensure a smooth gas supply. During the connection process, use suitable pipes and joints to ensure a firm connection and prevent gas leaks. Additionally, conduct a leak test to ensure no leaks occur. Exhaust Duct: During combustion, gas boilers produce exhaust gases, requiring an appropriate exhaust duct. The exhaust duct must be kept clear to prevent exhaust gases from lingering indoors, posing safety hazards and air pollution. Electrical Connection: Gas boilers typically require an electrical supply, so electrical connections must be made during installation. Ensure the electrical connections are correct and secure to avoid circuit shorts or other electrical issues. Water System: Gas boilers usually need to be connected to the water system, including water supply and drainage pipes. During the connection process, ensure the water pipes are securely connected to prevent leaks or unstable water pressure. Commissioning and Testing: After installation, commission and test the gas boiler. This includes ignition testing, combustion effect testing, and temperature control testing to ensure the boiler operates normally and is safe and reliable. It is recommended to follow relevant installation specifications and requirements when installing a gas boiler system. If you do not possess the necessary technical knowledge, it is best to have a qualified installer perform the operation to ensure the installation process is safe and reliable.
Shandong Zhongjie Special Equipment, welcome customers to our factory for business discussions.