Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) holds an A-grade boiler manufacturing license, an A2-grade pressure vessel manufacturing license, an A2-grade pressure vessel design license, a B-grade boiler installation license, and GB2/GB3-grade pressure pipeline installation licenses, as well as a machinery and electrical equipment installation contracting qualification. It is a member of the China Boiler and Water Treatment Association, the China Chemical Equipment Association, and the council member of the Shandong Equipment Manufacturing Association. The company has also passed certifications for the ISO9001 Quality Management System, ISO14001 Environmental Management System, OHSAS18001 Occupational Health and Safety Management System, and the American ASME/U2 certification.
Industrial boiler thermal deoxygenation is a commonly used deoxygenation method, featuring:  Deoxygenation: Thermal deoxygenation involves heating the boiler feed water to release dissolved oxygen from the water using heat. As the water temperature rises during the thermal deoxygenation process, the solubility of oxygen decreases, enabling the effective removal of oxygen from the water. No Chemicals Required: Unlike other deoxygenation methods, thermal deoxygenation does not require chemicals, thereby avoiding environmental pollution and equipment corrosion caused by chemicals. It also reduces operational costs and complexity. Automated Control: Thermal deoxygenation can be achieved through automated control systems, which adjust the feed water temperature and flow rate based on the boiler's operating status and water quality to achieve optimal deoxygenation. Wide Application Range: Thermal deoxygenation is suitable for various types of industrial boilers, including coal-fired, gas-fired, and oil-fired boilers. Whether for small or large boilers, thermal deoxygenation can be employed for deoxygenation treatment. Improves Boiler Efficiency: Removing dissolved oxygen from the water reduces corrosion and oxidation reactions within the boiler, extending its lifespan. Additionally, reducing oxygen content can enhance the boiler's thermal efficiency and reduce energy consumption. It should be noted that while thermal deoxygenation effectively removes oxygen from the water, other water quality issues such as hardness and alkalinity may require additional treatment methods. Therefore, in practical applications, it is essential to consider water quality characteristics and boiler requirements to select the appropriate deoxygenation method.

Before ignition, the preparation of a steam boiler involves the following steps: 1. Clean the boiler: First, clean the internal and external dirt and impurities from the boiler. Remove ash, sediments, and dirt to ensure the efficiency of combustion and heat exchange. 2. Check fuel supply: Inspect the fuel supply system to ensure a smooth fuel supply. Check the fuel storage, conveyance pipes, and filters, clearing blockages and replacing damaged parts. 3. Inspect the burner: Check the operational status and cleanliness of the burner. Clean the burner's nozzle and flame detector to ensure proper functioning. 4. Check the gas system: If it's a gas boiler, inspect the gas supply system. Check the gas pipes, valves, and pressure regulators to ensure safe and stable gas supply. 5. Check water level and pressure: Inspect the boiler's water level and pressure. Ensure the water level is within the normal range, and pressure is stable and meets requirements. Add water and adjust pressure if necessary. 6. Check safety devices: Inspect the boiler's safety devices, such as safety valves, pressure switches, and water level controllers. Ensure these devices are functioning properly to guarantee safe boiler operation. 7. Prepare ignition tools: Prepare the tools and equipment needed for ignition, such as a matchstick, igniter, etc. Ensure these tools are in good working order and safe. When performing the above preparation tasks, follow relevant operational procedures and safety requirements to ensure safety and effectiveness. If unsure about the preparation process, consult with experts or the boiler manufacturer for advice.

If the thermal oil boiler circulation pump encounters an issue, follow these steps for troubleshooting: 1. Shut down and inspect: First, stop the thermal oil boiler and disconnect the power. Check for any obvious signs of failure in the pump, such as unusual noises, oil leaks, or leaks. Inspect the motor for proper operation and any abnormal heat generation. 2. Clean the pump body: If sediment or impurities are found in the pump body, clean them. Use appropriate tools and cleaning agents to remove dirt and obstructions inside the pump. Ensure safe operation to avoid damaging the pump body. 3. Check pump connections: Inspect the pump's connections, including inlets and outlets, valves, and seals. Ensure they are securely fastened, valves operate smoothly, and seals are intact. Repair or replace any loose or damaged parts promptly. 4. Inspect the pump motor: Check if the motor operates normally and for any abnormal sounds or heating. Inspect the power lines and control system of the motor to ensure normal power supply and correct control signals. 5. Check the lubrication and cooling system: Ensure the pump's lubrication and cooling system are functioning properly. Check the supply of lubricating oil or grease, and the circulation and temperature control of cooling water or coolant. 6. Adjust pump parameters: Depending on the situation, adjust pump parameters such as flow rate and lift. Adjust the pump speed or valve opening according to equipment requirements and operating conditions to meet the thermal energy needs of the boiler. 7. Seek repair if necessary: If the above steps do not resolve the issue or more in-depth maintenance is required, consider seeking professional repair services. Contact the maintenance personnel or manufacturer's technical support for further troubleshooting and repairs. It's crucial to prioritize safety when dealing with thermal oil boiler circulation pump issues, adhering to relevant operating procedures and safety requirements. If unsure how to proceed or if there are potential safety hazards, seek assistance immediately.

When selecting a thermal oil furnace for the rubber industry, pay attention to the following aspects:  Temperature Requirements: Determine the required working temperature range based on the process needs of the rubber industry. Ensure that the thermal oil furnace can stably provide the required working temperature. Thermal Load: Calculate the required thermal load based on the production scale and process requirements of the rubber industry. Ensure that the thermal load of the thermal oil furnace meets the needs of the rubber industry. Thermal Efficiency: The thermal efficiency of the thermal oil furnace directly affects energy consumption and operating costs. Consider the thermal efficiency when choosing a thermal oil furnace and opt for energy-saving products. Safety: The safety of the thermal oil furnace is crucial. Choose a furnace with comprehensive safety protection devices and an automatic control system to ensure safe and reliable operation. Maintenance: Proper maintenance is vital for extending the service life and ensuring normal operation of the thermal oil furnace. Consider the ease of maintenance and cost when selecting a thermal oil furnace. Manufacturer's Reputation: Choose a thermal oil furnace manufacturer with a good reputation and extensive experience to ensure the reliability of product quality and after-sales service. Cost-Effectiveness: Consider the price, energy consumption, and maintenance costs of the thermal oil furnace, and choose products with good cost-effectiveness. When purchasing a thermal oil furnace, it is recommended to consult and communicate with heating equipment suppliers or engineers, make selections based on specific needs, and adhere to relevant industry standards and regulations.
Zhongjie Special Equipment adheres to the grand vision of "realizing employee dreams, creating customer value, and striving for the prosperity and strength of our motherland," devoting itself wholeheartedly to the development of green energy equipment. We offer society products and services that combine high value with competitive prices!