Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinnan Road, Economic and Technological Development Zone, Heze City. With a registered capital of 50 million yuan and total assets of 500 million yuan, the company has 7 business centers: boilers, deep-freezing containers, pressure vessels, central air conditioning, engineering installation, international trade, and Internet of Things. It has three factory sites on Jinnan Road, East Changjiang Road, and Bohai Road, covering a total area of 200,000 square meters, with the main workshop spanning 83,000 square meters. It currently employs 710 people, including 247 engineers and technicians and 82 intermediate-level technicians. In December 2016, it was recognized as a "High-tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise in Shandong Province" by the Ministry of Industry and Information Technology. In June 2022, it was recognized as a "Gazelle Enterprise in Shandong Province" and in August 2022, it was identified as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
The management system for gas heat-conducting oil furnace equipment mainly includes the following aspects: 1. Equipment Safety Management System: Establish and improve the safety management system for gas heat-conducting oil furnace equipment, clarify responsibilities and authorities, and ensure safe operation of the equipment. This includes safe operation procedures, emergency response plans, equipment inspection and maintenance schedules, etc. 2. Equipment Maintenance Management System: Establish a maintenance management system for the equipment, clarify maintenance responsibilities and plans. This includes regular equipment inspections, maintenance, and repairs to ensure proper operation and safety. 3. Equipment Operation Management System: Establish an equipment operation management system, clarify operation procedures and requirements. This includes start-up, shutdown, adjustment, and monitoring processes to ensure equipment safety and operation. 4. Equipment Accident Management System: Establish an equipment accident management system, clarify reporting, investigation, and handling procedures for accidents. This includes reporting requirements for equipment accidents, responsibility pursuit, cause analysis, and improvement measures to reduce accidents and minimize losses. 5. Equipment Training and Assessment System: Establish a training and assessment system for equipment operators to ensure they possess necessary skills and knowledge. This includes operation training, safety training, and technical training, as well as regular assessments and evaluations of operators. 6. Equipment Inventory and Record Management System: Establish an equipment inventory and record management system to record equipment operation, maintenance, and accident records. This includes inventory management, completion and preservation of maintenance records, and organization and analysis of accident records for equipment management and issue tracing. The above is some basic content of the management system for incidents related to gas heat-conducting oil furnace equipment. Specific management systems should be formulated and improved based on actual conditions. Additionally, relevant laws, regulations, and standards must be followed to ensure equipment safety and environmental performance.

A thermal oil heater is a device that uses thermal oil as a heat medium to transfer heat energy produced by combustion or electric heating to the equipment or process requiring heating. The working principle of a thermal oil heater involves heating the thermal oil to a certain temperature and then circulating it through a pump to the heated equipment or process, transferring heat to the heated object. The thermal oil exchanges heat with the heated object in the heat exchanger, raising the temperature of the object while cooling the oil, which then returns to the furnace for reheating in a continuous cycle. The heat transfer process in a thermal oil heater primarily relies on the thermal conductivity of the oil. Thermal oil has high thermal conductivity, enabling rapid transfer of heat energy to the heated object, achieving effective heating. Additionally, it boasts high thermal stability, allowing stable operation at high temperatures without decomposition or oxidation. A thermal oil heater typically consists of the furnace body, combustion system, flue gas system, heat exchanger, circulating pump, and control system. The furnace body is the main part of the thermal oil heater, used to contain the thermal oil and combustion system. The combustion system is responsible for burning fuel to generate heat and heat the thermal oil. The flue gas system is used to exhaust the combustion by-products. The heat exchanger is the equipment where the thermal oil exchanges heat with the heated object. The circulating pump is responsible for circulating the thermal oil back to the furnace for reheating. The control system monitors and controls the operation of the thermal oil heater to ensure safe and stable operation. Thermal oil heaters offer advantages such as high temperature control accuracy, fast heating speed, low energy consumption, and easy operation, and are widely used in industrial fields like chemicals, textiles, food processing, papermaking, as well as in special heating processes.

The gas steam boiler's gas consumption over a year, for a capacity of 1 ton, depends on various factors, including the efficiency of the boiler, load conditions, and operating hours. Generally, it can be estimated using the following formula: Gas Consumption (m) = Boiler Efficiency × Rated Thermal Power × Operating Hours. Here, boiler efficiency refers to the heat energy utilization efficiency of the boiler, usually expressed as a percentage; rated thermal power is the rated thermal output of the boiler, typically in kilowatts (kW); and operating hours are the duration the boiler operates, usually measured in hours. It's important to note that the efficiency and rated thermal power of the boiler can be determined based on the specific model and parameters, while operating hours require estimation based on actual usage. Therefore, to accurately calculate the annual gas consumption for a 1-ton gas steam boiler, it is recommended to refer to the technical specifications and operating records of the boiler, or consult the manufacturer or engineer.

Chemical cleaning of industrial boilers is a common method that effectively removes dirt and deposits inside the boiler, enhancing heat exchange efficiency and extending the boiler's lifespan. Below are the general steps and methods for industrial boiler chemical cleaning: Preparation: Turn off the boiler's power and gas supply, drain the water and steam from the boiler, and ensure the boiler is in a safe condition. Prepare the required chemical cleaning agents and equipment. Cleaning Agent Selection: Choose a suitable chemical cleaning agent based on the boiler's material and the nature of the dirt. Common cleaning agents include acidic, alkaline, and chelating agents. Cleaning Agent Circulation: Dissolve the cleaning agent in an appropriate amount of water and circulate it into the boiler using a pump. Determine the circulation time and temperature based on the size of the boiler and the extent of the dirt. Cleaning Agent Action: During the circulation, the cleaning agent reacts chemically with the dirt inside the boiler, dissolving and decomposing it. Acidic cleaning agents can remove rust and scale, while alkaline cleaning agents can remove grease and organic matter. Rinsing and Neutralizing: After the cleaning agent circulation is complete, rinse the boiler with clean water to flush out the cleaning agent and dissolved dirt. Use a neutralizing agent to neutralize any remaining acidic or alkaline substances, ensuring the boiler's neutrality. Inspection and Maintenance: After cleaning, inspect the boiler to ensure the cleaning effect and normal operation. Perform necessary maintenance and repairs as needed. Points to Note When Conducting Industrial Boiler Chemical Cleaning: - Adhere strictly to the instructions and safety operation procedures for chemical cleaning agents to ensure the safety of the operators. - Select the appropriate cleaning agent and method based on the boiler's material and the cleaning agent's properties. - Control the concentration, temperature, and circulation time of the cleaning agent to avoid unnecessary damage to the boiler. - Monitor the concentration and pH of the cleaning agent in a timely manner during the cleaning process and adjust the cleaning conditions. - Flush the boiler after cleaning to ensure all cleaning agents and dirt are removed. - Perform boiler maintenance and repairs promptly after cleaning to ensure normal operation and long-term use.
Zhongjie Special Equipment adheres to the great vision of "Realizing employee dreams, creating customer value, and striving for the prosperity and strength of our motherland," focusing solely on the development of green energy equipment. We dedicate high-quality, cost-effective products and services to society!