Shandong Zhongjie Special Equipment Co., Ltd. (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinnan Road, Economic and Technological Development Zone, Heze City, with a registered capital of 50 million yuan and total assets of 500 million yuan. The company has 7 business centers: boiler, deep-freeze container, pressure vessel, central air conditioning, engineering installation, international trade, and Internet of Things. It has three factory sites on Jinnan Road, East Changjiang Road, and Bohai Road, covering a total area of 200,000 square meters, with the main workshop spanning 83,000 square meters. It currently employs 710 staff, including 247 engineers and technicians and 82 intermediate-level technicians. In December 2016, it was recognized as a "High-Tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise in Shandong Province" by the Department of Industry and Information Technology. In June 2022, it was recognized as a "Gazelle Enterprise in Shandong Province" and in August 2022, as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
To extend the service life of steam boilers, the following measures can be taken: - Regular Maintenance: Conduct regular maintenance on the boiler, including cleaning the burner, flue, and heat exchanger, inspecting and replacing worn parts, to ensure normal operation and efficiency. - Water Quality Control: Maintain good water quality in the boiler to prevent scale and corrosion from damaging the boiler. Regularly test water quality and take appropriate water treatment measures based on test results, such as descaling and replenishing missing chemicals. - Control the Combustion Process: Reasonably control the combustion process to ensure the normal operation and efficiency of the burner. Regularly check the burner's operational status, adjust combustion parameters, and avoid overheating or underheating issues. - Regular Cleaning of Flues and Heat Exchangers: Regularly clean the flues and heat exchangers to remove accumulated dust and dirt, maintain heat exchange efficiency, and avoid overheating and energy loss. - Regular Inspection of Safety Devices: Regularly inspect the boiler's safety devices, including safety valves, pressure switches, and water level controllers, to ensure they are functioning properly and to ensure safe operation of the boiler. - Record Keeping and Monitoring: Record the boiler's operating parameters, maintenance records, and fault situations, regularly monitor and analyze them, and address issues promptly. - Train Operators: Ensure operators have sufficient knowledge of boiler operation and maintenance, operate and maintain the boiler correctly, and avoid damage caused by operational errors and improper maintenance. - Regular Overhauls: Based on the boiler's usage and the manufacturer's recommendations, regularly perform major repairs and overhauls, replace worn-out components, and extend the boiler's service life. - Please note that for safety and effectiveness, maintenance and overhauls should be performed by qualified personnel.

WNS Low-Nitrogen Condensing Hot Water Boilers offer the following advantages: - Low Nitrogen Emissions: Utilizing low-nitrogen combustion technology, these boilers significantly reduce NOx emissions through optimized combustion processes and burner design. This helps in reducing environmental pollution. - High Thermal Efficiency: Equipped with condensing technology, these boilers enhance energy utilization by recovering heat from flue gases. The thermal efficiency of condensing hot water boilers typically exceeds 90%, surpassing traditional hot water boilers. This aids in energy conservation and cost reduction. - Safety and Reliability: The control systems and safety devices in WNS Low-Nitrogen Condensing Hot Water Boilers provide excellent safety performance. They are equipped with multiple safety features such as overheat protection, overpressure protection, and water level protection, which automatically monitor and control the boiler's operation to ensure safe operation. - Flexibility: Suitable for various applications including industrial, commercial, and residential, these boilers can accommodate different thermal load requirements, offering strong flexibility. They can also be integrated with other systems like solar hot water systems and ground-source heat pump systems to further improve energy efficiency. - Easy Operation and Maintenance: The operation and maintenance of WNS Low-Nitrogen Condensing Hot Water Boilers are straightforward.

In industrial boiler systems, the key functional parameters of pumps include the following aspects:  Flow Rate: The flow rate of a pump refers to the volume of liquid pumped per unit of time. In industrial boilers, pumps must provide sufficient flow to meet the boiler's water requirements. The size of the flow rate depends on the boiler's rated evaporation capacity and the design requirements of the circulating water system. Head: The head of a pump is its ability to overcome liquid resistance and lift the liquid to a certain height. In industrial boilers, pumps need to have adequate head to ensure smooth flow to all parts of the boiler, including the feed water system and circulating water system. Power: The power of a pump is the electrical or mechanical energy required to drive the pump. In industrial boilers, the power of the pump must be determined based on flow rate and head to meet the system's needs. Efficiency: The efficiency of a pump is the ratio of the input energy to the output fluid energy. High-efficiency pumps can reduce energy consumption and operating costs. In industrial boilers, selecting high-efficiency pumps can improve the energy efficiency performance of the system. Operational Stability and Reliability: Pumps in industrial boiler systems must have good operational stability and reliability. Pumps should be able to run stably for a long time without being affected by external interference or fluctuations and should be adaptable to different operating conditions. Pumps should be selected based on the specific industrial boiler system and design requirements, ensuring that the functional parameters meet the system's needs. Additionally, the selection and operation of pumps must comply with relevant standards and regulations to ensure safe and reliable operation.

When installing a gas boiler unit, the following points should be noted: Safety: A gas boiler is a device that uses gas as fuel, so safety must be ensured during installation. First, select an appropriate installation location, away from flammable materials and combustible gases, and ensure good ventilation. Second, install according to relevant safety regulations, including the connection of gas pipes and the installation of gas valves. Pipe Connection: A gas boiler requires connection to the gas pipeline to ensure a smooth gas supply. During the connection process, use suitable pipes and joints to ensure a secure connection and prevent gas leaks. Additionally, conduct a leak test to ensure no leaks occur. Exhaust Duct: During combustion, a gas boiler produces exhaust gases, necessitating a proper exhaust duct. The exhaust duct must be kept clear to prevent the accumulation of exhaust gases indoors, which can pose safety hazards and air pollution. Electrical Connection: Gas boilers typically require electrical power, so electrical connections must be made during installation. Ensure the electrical connections are correct and secure to avoid circuit shorts or other electrical issues. Water System: Gas boilers usually need to be connected to the water system, including water supply and drainage pipes. During the connection process, ensure the water pipes are securely connected to prevent leaks or unstable water pressure. Commissioning and Testing: After installation, commissioning and testing of the gas boiler should be carried out. This includes ignition tests, combustion efficiency tests, and temperature control tests to ensure the boiler operates normally and is safe and reliable. It is recommended to follow relevant installation specifications and requirements when installing a gas boiler unit. If you do not possess the necessary technical knowledge, it is best to have a qualified installer perform the operation to ensure the process is safe and reliable.
Our company highly values technological innovation and R&D design. We have one city-level technical center in Heze City, equipped with non-destructive testing, physical and chemical testing, welding testing, hydrostatic testing, and other testing facilities. We have over 600 types of equipment, including CNC machine tools, X-ray flaw detectors, digital ultrasonic flaw detectors, mechanical property testing machines, chemical analyzers, spectrometers, tensile testing machines, plasma welding machines, and more. The key products we have developed, such as temperature-pressure vessels, biomass boiler emission reduction, and waste heat utilization, have successively been selected for multiple Shandong Provincial Department of Industry and Information Technology science and technology projects, Shandong key projects, and Heze City innovation and excellence projects. We have accumulated 27 authorized utility models, 16 authorized inventions, participated in drafting 2 standards, 2 industry standards, and registered 15 trademarks. The deep cryogenic container processing technology jointly developed by our technical team and Professor Yajiang Li from Shandong University, using the international plasma arc + filler wire tungsten inert gas arc welding (PAW-GTAW) technology, has been appraised as reaching international standards in the field of deep cryogenic container manufacturing at the provincial level.
Choose ZJET's custom solutions, let's create brilliance together!