Here are some key points to determine the quality of glass partition installation:

Appearance Inspection:

The glass surface should be free of scratches, cracks, stains, and other defects.

The overall appearance of the partition should be flat and vertical, with no obvious tilt or deformation.

Tensile Strength:

Push the partition gently; there should be no noticeable sway or looseness.

Inspect connection points, such as screws and clamps, to ensure they are securely fastened and there is no looseness.

Sealing Performance:

Inspect the sealant carefully; there should be no cracks, missing areas, and it should seal properly, neither allowing wind nor water to seep through.

Uniform gap consistency:

The gap between the glass and the frame should be even and consistent, meeting the required width.

Door Openings and Closings:

If glass doors are present, they should open and close smoothly without any jamming or unusual noises.

The door locks and accessories are correctly installed and functioning properly.

Horizontal and Vertical:

- The partition should be level and perpendicular, as inspected with a level and other tools.

Soundproofing Effectiveness:

Tests conducted in appropriate environments should achieve the expected soundproofing level.

Environmental Compatibility:

The partitions installed should be harmonious with the surrounding environment, avoiding any abruptness.

For inspection, gently push various parts of the glass partition to feel its stability; observe the integrity and continuity of the sealing胶 to assess the sealing effect; measure the width of the gaps to check for uniformity. If any visible defects, unstable partitions, poor sealing, or other obvious issues are found, the installation is不合格, and immediate corrective actions and repairs are required.