0.1LKH Intensive Mixing Machine

ZG-0.1LKH Laboratory Miniature Electric Heating Open/Close Molding Compounding Machine

Compounding chamber volume: 0.1L

2. Main Motor: AC motor, 1.5 kW power rating

3. Gearbox: Features a low-carbon steel base and frame with a forced lubrication recirculation system.

4. Rotor: Double-edged, synchronous rotor structure (can also be designed and manufactured according to customer-provided rotor structure drawings), front and rear rotor speed ratio of 1:1.40 or ST synchronous rotor; specific parameters can be customized according to customer requirements. Cast steel heat treatment and hardening, surface hard chrome plating; ball roller bearings for bearings; bearing lubrication bath; rotor speed: 0.1L: 36 RPM; specific speed can be customized according to customer requirements.

5. Walling: Steel structure, drilled and heat treated, with hardened inner surface chrome plating treatment.

6. Bracket: Steel structure, inner surface treated with hard chrome plating for hardening.

7. Top pin: Cylinder-driven, hard chrome-plated surface

8. End Face Sealing: Sealing ring made of high-wear-resistant material, self-lubricating bearings, hinge spring pressure-sealed

9. Feeding hopper: Manual operation

10. Control Methods: Manual, semi-automatic; Compounding Machine Temperature: Standard compounding machine: tap water temperature +10° to 300°

11. Base, Rack: Welded with H-beams and steel plates, processed into shape

12. Mixing Room: The middle groove is made of wear-resistant alloy steel, with side walls welded from medium carbon steel plates and processed.

13. Mixing shaft: Alloy steel used for the shaft core and blades

14. Bushing: Made of ZG20 steel, with roller bearings used for the bearing

15. Feeding Equipment: This mechanical design features a front loading mechanism, with pressure adjustable via the user's air valve as desired.

16. Leak Prevention Device: The side end of the stirrer shaft is equipped with a mechanical shaft seal clamp, with a leak prevention structure that has been certified.

17. Pressure Cap Assembly: Made of alloy steel, applies pressure to the raw materials during mixing operations, with the action of an air cylinder performing vertical up and down lifting movement.

18. Discharge Structure: Open/close discharge from the mixing chamber; manual discharge for the intensive mixer.

19. Main Motor: 1.5KW AC, 220V Voltage

20. Drive Method: Main motor and reducer are integrated for transmission

21. Air Compressor Pipe Fittings: Compressed air accessories (3-point assembly, solenoid valve) and mechanical body piping

22. Temperature Setting: Both automatic and manual options available

23. With alert action, various timing settings, and reversible operation

24. The main electrical parts are imported brands, with the whole machine bearings using Timken TWB brand.

25. The agitator shaft is made of alloy steel. Wear-prone areas are reinforced with imported German abrasion-resistant steel, for added strength and durability.

26. Mixed tank "Shan" model, the main body of the mixed tank is made of wear-resistant alloy steel and processed as a whole; the shearing section is surfacing with German high-speed steel.

27. Side wall leak prevention device made with high-tech materials: Leak prevention structure certified

28. The pressure cap is designed with an "M" type structure for more even rubber compound mixing.

29. Volume: (W×D×H) 890*590*1450mm

Weight: 100KG