0.05 LKH compounding machine

ZG-0.05LKH Laboratory Miniature Electric Heating Open-And-Closed Milling Compounder

Compounding chamber volume: 0.05L

2. Main Motor: AC motor, 1.5 kW power

3. Gearbox: Base and frame constructed with low-carbon steel structure, equipped with a forced lubrication circulation system.

4. Rotor: Bi-convex, synchronous rotor design (can also be manufactured according to the customer-provided rotor structure drawing), front-to-back rotor speed ratio of 1:1.40 or ST synchronous rotor specific parameters can be customized according to customer requirements. Cast steel heat-treated and hardened, surface镀铬; bearing is a ball roller bearing; bearing oil bath; rotor speed: 0.05L: 36 RPM, specific speed can be customized according to customer requirements.

5. Face Milling: Steel structure, drilling and heat treatment, internal surface hardened chrome plating.

6. Bracket: Steel structure, internally treated with hardened chrome plating for surface hardening.

7. Top栓: Cylinder-driven, hard chrome-plated surface

8. End Face Sealing: Sealing ring made of high-wear-resistant material, self-lubricating bearing, hinge spring pressing type seal

9. Filler hopper: Manual operation

10. Control Methods: Manual, semi-automatic; Milling Machine Temperature: Standard Milling Machine: Tap water temperature +10°-30°C

11. Base, Frame: Welded from steel sections and plates, processed into shape

12. Mixing Room: The middle trough is made of wear-resistant alloy steel for the side walls, which are welded from medium carbon steel plates and then processed.

13. Stirring shaft: Alloy steel for shaft and blades

14. Bushing: Made of ZG20 steel, with roller bearings used for the bearing

15. Feeding Unit: This mechanical design features a front feeding device, with pressure adjustable at the user's gas valve as desired.

16. Leak Prevention Device: The side end of the agitator shaft is equipped with a mechanical shaft seal clamp, with the leak-proof structure certified.

17. Pressure Cap Assembly: Made of alloy steel, applies pressure to the raw materials during mixing operations, utilizing a pneumatic cylinder for vertical up and down movement.

18. Discharge Structure: Open/close discharge in the mixing chamber, manual discharge from the intensive mixer

19. Main Motor: 1.5KW AC, 220V Voltage

20. Drive Method: Main motor and reducer are integrated drive

21. Air Compressor Pipeline: Compressed air accessories (3-point assembly, solenoid valve) and mechanical body piping

22. Temperature Setting: Both automatic and manual options available.

23. features prompt action, various time settings, and reversible operation

24. Key electrical components are imported brands, with the whole machine bearings using Timken TWB brand.

25. The stirrer shaft is made of alloy steel. Welded with imported German abrasion-resistant high-speed steel on areas prone to wear, it is even more secure and durable.

26. "Shan" type blending trough, the main body of the blending trough is made of wear-resistant alloy steel, with cladding of German high-speed steel at the cutting section.

27. Side wall leak-proof device made with high-tech materials: Leak-proof structure certified

28. The pressure cap is designed with an "M" type structure for more even rubber compound mixing.

29. Volume: (W×D×H) 890*590*1450MM

Weight: 100KG