0.5LKH Open-End Compounding Machine

ZG-0.5LKH Laboratory Mini Electric Heating Water-Cooling Open/Close Molding Compounder

Volumetric Capacity of Compounding Chamber: 0.5L

2. Main Motor: AC motor, 3.7 kW power

3. Gearbox: Base and frame constructed with low-carbon steel structure, equipped with a forced lubrication circulation system.

4. Rotors: Bi-convex, synchronous rotor design (also available for customization according to customer-provided rotor structure diagrams), front and rear rotor speed ratio of 1:1.20 or ST synchronous rotor; specific parameters can be customized to meet customer requirements. Cast steel heat treatment and hardening, surface hard chrome plating; ball bearing roller bearings for bearings; bearing lubrication bath; rotor speed: 0.5L: 36 RPM; specific speed can be customized according to customer needs.

5. Walling: Steel structure, drilled and heat-treated, with a hard chrome plating on the inner surface; Bracket: Steel structure, with a hard chrome plating on the inner surface for hardening.

6. Top Pin: Cylinder-driven, surface hard chrome plated. End face sealing: sealing ring made of high-wear-resistant material, self-lubricating bearing, hinge spring pressing seal.

7. Feed hopper: Manual operation. Control methods: manual, semi-automatic; High-temperature compounding machine temperature: room temperature +10° to high-temperature compounding machine with 650°.

8. Base: The frame is made by welding steel sections and steel plates, then processed into shape.

9. The mixing chamber's middle groove is made of wear-resistant alloy steel, with side walls constructed from medium-carbon steel plates that are welded and processed.

10. Stirring shaft - The shaft core and blades are made of alloy steel. The bearing housing is made of ZG20 steel, and the bearings are roller bearings.

11. Feeding Device - This mechanical design features a front-loading feeding device, with pressure adjustable to the user's preference via an air valve.

12. Leak Prevention Device - The side end of the agitator shaft is equipped with a mechanical shaft seal, and the leak-proof structure has been certified.

13. Pressure Cap Assembly: Made of alloy steel, applies pressure to the raw materials during mixing operations, utilizing an air cylinder for vertical lifting and lowering actions.

14. Discharge Unit: The compounding chamber opens pneumatically automatically, with material dropping into the center collection tray (easier to pick up materials, and cleaning is more convenient).

15. Drive Structure: Main motor 3.7KW AC, voltage 380V. Drive Method: The main motor and the reducer are connected for integrated drive.

16. Air Compressor Pipe Fittings: Compressed air accessories (3-point assembly, solenoid valve) and mechanical body piping

17. Primary Electrical Control Equipment: Temperature setting: both automatic and manual options available. With prompt actions, various timing settings, and capable of forward and reverse operations.

Advantages of the machine unit

18. The main electrical components are imported brands, with the entire machine bearings using Timken TWB brand.

19. The stirrer shaft is made of alloy steel. Welded with imported German abrasion-resistant steel at the parts prone to wear, offering increased strength and durability.

20. Mixed tank "Shan" model, the main body of the mixed tank is made of wear-resistant alloy steel, and the shearing part is surfacing with German锋steel.

21. Side wall leak prevention device made with high-tech materials: Leak-proof structure certified

22. The pressure cover utilizes an "M" type structure for more even rubber material mixing.

23. Volume: (W×D×H) 1450*600*1590MM

24. Weight: 450 kg