2LKH Intensive Mixer | Intensive Mixer Manufacturer

ZG-2LKH Laboratory-Use Small Electric Heating Water-Cooled Open-Closed Molding Compactor

2L Compounding Room Volume

2. Main Motor: AC motor, 5.5 kilowatts power rating

3. Gearbox: Base and frame constructed with low-carbon steel structure, equipped with a forced lubrication circulation system.

4. Rotor: Double-edge, synchronous rotor structure (can also be designed and manufactured according to customer-provided rotor structure drawings), front and rear rotor speed ratio of 1:1.20 or ST synchronous rotor; specific parameters can be customized according to customer requirements. Cast steel heat treatment and hardening, surface hard chrome plating; ball and roller bearings; bearing lubrication bath; rotor speed: 2L: 36 RPM; specific speed can be customized according to customer requirements.

5. Face Milling: Steel structure, drilling and heat treatment, hard chrome plating on the inner surface; Bracket: Steel structure, hard chrome plating on the inner surface for hardening.

6. Top Bolt: Cylinder-driven, surface hard chrome plated. End face sealing: sealing ring made of high-wear-resistant material, self-lubricating bearing, hinge spring pressure seal.

7. Filling hopper: manual operation. Control method: manual or semi-automatic operation; Compounding machine temperature: normal temperature +10° to high-temperature compounding machine up to 650°.

8. Base: The frame is fabricated using steel bars and steel plates, processed into shape.

9. The mixing chamber's middle trough is made of wear-resistant alloy steel. The side walls are welded from medium carbon steel plates and then processed.

10. Stirring shaft - The shaft and blades are made of alloy steel. The bearing housing is made of ZG20 steel, and the bearings are roller bearings.

11. Feeding Equipment - This machine is designed with a front-loading feeding device, where the pressure can be arbitrarily adjusted by the user via an air valve.

12. Leakproof Device - The side end of the agitator shaft utilizes a mechanical shaft seal clamp, with a leakproof structure certified.

13. Pressure Cap Assembly: Made of alloy steel, applies pressure to the raw materials during blending operations, utilizing an air cylinder for vertical up and down movement.

14. Discharging Device: The kneading chamber is pneumatically automatically opened, allowing materials to fall into the receiving tray in the middle (easy to retrieve, cleaner and simpler to maintain).

15. Transmission Structure: Main Motor, 5.5KW AC, Voltage 380V. Transmission Method: The main motor and reducer are connected for integrated transmission.

16. Air Compressor Pipe Fittings: Compressed air accessories (3-point assembly, solenoid valve) and mechanical body piping

17. Main Electrical Control Equipment: Temperature Setting: Both automatic and manual options available. With alarm functions and various time settings, it can achieve forward and reverse operation.

Advantages of the machine unit

18. Key electrical components are of imported brands, with the whole machine bearings using Timken TWB brand.

19. The agitator shaft is made of alloy steel. The wear-prone areas are welded with imported German wear-resistant steel, providing enhanced strength and durability.

20. "Mountain" type mixing trough, the main body of the mixing trough is made of wear-resistant alloy steel, and the shearing section is surfacing with German high-speed steel.

21. Side wall leak prevention device made with high-tech materials: Leak-proof structure certified

22. The pressure cap features an "M" type structure for more even rubber material mixing.

23. Volume: (W×D×H) 1450*600*1590MM

24. Weight: 450 kg