2L Compounding Machine

ZG-2L Laboratory-Sized Electric Water-Cooled Mini Compounding Machine

1. Compounding Room Volume: 2L. Main Motor: AC motor, 5.5 kW power

2. Gearbox: Base and frame constructed with low-carbon steel structure, equipped with a forced lubrication recirculation system.

3. Rotor: Two-blade, synchronous rotor design (can also be manufactured according to customer-provided rotor structure drawings), front-to-back rotor speed ratio of 1:1.20 or ST synchronous rotor; specific parameters can be customized according to customer requirements. Cast steel hardened treatment, surface chrome plated; ball roller bearings for bearings; bearing lubrication bath; rotor speed: 2L: 36 RPM; specific speed can be customized according to customer requirements.

4. Facing: Steel structure, drilling and heat treatment, with hard chrome plating on the inner surface; Bracket: Steel structure, with hard chrome plating on the inner surface for hardening.

5. Top栓: Cylinder-driven, surface hard chrome plated. End face sealing: Sealing ring made of high-wear-resistant material, self-lubricating bearing, hinge spring pressure seal.

6. Filling hopper: manual operation. Control method: manual or semi-automatic; Refining machine temperature: room temperature to 300°, capable of high temperature up to 650°.

7. Base: The frame is made by welding steel beams and steel plates, then processed. Mixing chamber: The middle groove is made of wear-resistant alloy steel.

8. The side walls are made of medium carbon steel plate, welded and processed. The stirrer shaft and blades are made of alloy steel.

9. Bearing Mount - Made of ZG20 steel, with roller bearings used for the bearing.

10. Feeding Unit - This mechanical design features a front-loading feeding unit, with pressure adjustable to the user's preference via an air valve.

11. Leakproof Device - The side of the agitator shaft is equipped with a mechanical shaft seal, with a certified leakproof structure.

12. Pressure Cap Assembly - Made of alloy steel, applies pressure to the raw materials during blending operations, with the pneumatic cylinder performing an up-and-down vertical lifting action.

13. Discharge Unit: Structure - Air-assisted tilting from the mixing chamber. Tilt Angle: 110° to 135°. Tilt Power: Cylinder-driven

14. Drive Structure: Main Motor: 5.5KW AC, Voltage 380V. Drive Method: The main motor and reducer are connected as an integrated drive.

15. Air Compressor Pipeline: Compressed air accessories (3-point assembly, solenoid valve) and mechanical body pipeline

16. Primary Electrical Control Equipment: Temperature settings: both automatic and manual options available. With alarm functions, various timing settings, and capability for forward and reverse operation.

Advantages of the machine unit

17. The main electrical components are imported brands, with the whole machine bearings using Timken TWB brand.

18. The stirrer shaft is made of alloy steel. Welded with imported German wear-resistant high-speed steel on areas prone to wear, for enhanced rigidity and durability.

19. "Mountain" type mixing tank, the main body of the mixing tank is made of wear-resistant alloy steel, and the shearing section is surfacing with German high-speed steel.

20. Side wall leak prevention device made with high-tech materials: Leak-proof structure certified

21. The pressure cap is designed with an "M" type structure for more even rubber material mixing.

22. Volume: (W×D×H) 1150*500*1580MM

23. Weight: 365 kg