10L Compounding Machine

ZG-10L Electric Water-Cooled Compounding Machine

Volumetric Capacity of Compounding Room: 10L

2. Main Motor: AC motor, 30 kW power

3. Gearbox: Base and frame constructed of low-carbon steel structure, equipped with a forced lubrication recirculation system.

4. Rotor: Double-edge, synchronous rotor structure (can also be designed and manufactured according to the customer-provided rotor structure drawing), front and rear rotor speed ratio of 1:1.59 or ST synchronous rotor, cast steel hardened treatment, hard chrome plated surface; ball and roller bearing for bearings; bearing lubrication bath; rotor speed: 10L: 36 rpm

5. Bead Blasting: Steel structure, drilling and heat treatment, with a hard chrome plating on the inner surface for hardening.

6. Bracket: Steel structure, internal surface treated with hardened chrome plating.

7. Top栓: Cylinder-driven, hard chrome-plated surface

8. End Face Sealing: High-wear-resistant material sealing ring, self-lubricating bearing, hinge spring pressure-top sealing

9. Feeding hopper: Manual operation

10. Control Methods: Manual and semi-automatic operation; Refining Machine Temperature: Standard temperature ranges from tap water to normal temperature to 300°.

11. Base, Rack: Welded from H-beams and steel plates, processed into shape

12. Mixing Room: The middle groove is made of wear-resistant alloy steel, and the side walls are welded and processed from medium carbon steel plates.

13. Mixing shaft: Alloy steel used for the shaft core and blades

14. Bearing Base: Made of ZG20 steel, fitted with roller bearings

15. Feeding Device: This mechanical design features a front feeding mechanism, with pressure adjustable at will by the user through an air valve.

16. Leak Prevention Device: Mechanically sealed shaft packing at the side end of the agitator shaft, with a leak-proof structure certified.

17. Pressure Cap Assembly: Made of alloy steel, applies pressure to the raw materials during blending operations, utilizing an air cylinder for vertical up and down movement.

18. Discharging Mechanism Structure: Hydraulically tilting mixer chamber. Tilt Angle: 110°-135°. Tilt Power: Hydraulic dump body

19. Transmission Structure: Main Motor: 30KW AC, Voltage: 380V. Transmission Method: The main motor and reducer are connected as an integral transmission.

20. Air Compressor Piping: Compressed air accessories (three-point assembly, solenoid valve) and mechanical body piping

21. Primary Electrical Control Equipment: Temperature Setting: Both automatic and manual options available, with prompt actions, various time settings, and capability for forward and reverse operation.

22. The main electrical components are of imported brands, with the whole machine bearings using Timken TWB brand.

23. The agitator shaft is made of alloy steel. Welded with imported German wear-resistant hard steel on the areas prone to wear, for increased strength and durability.

24. "Shan" type mixing trough, the main body of the mixing trough is made of wear-resistant alloy steel, and the cutting section is surfacing with German high-speed steel.

25. Side wall leak prevention device made with high-tech materials: Leak-proof structure certified

26. The pressure cap features an "M" type structure for more even rubber material mixing.

27. Volume: (W×D×H) 2000*980*2380mm

28. Weight: 2000 kg