Drip irrigation tape utilizes plastic pipes to deliver water through emitters attached to the tape for crop irrigation. This method ensures more even soil irrigation. As the product boasts good adhesion and high frost resistance, its popularity has been on the rise. While it's quite convenient to use, there are some basic requirements to be aware of during installation. Let's take a closer look!

1. In accordance with the design specifications, verify the equipment models, specifications, quantities, and quality, and strictly prohibit the use of substandard drip irrigation tape products. Equipment to be installed should be kept clean, and plastic pipes must not be thrown, dragged, or exposed to the sun.

2. Install water meters, valves, and filters according to design specifications and flow markings. The filters are connected to the branch pipes via threaded straight-through connections.

3. Threaded pipe fittings require wrapping with a rubber tape during installation, and the straight-through lock nut should be tightened.

Before installing the product, use a drill bit to make holes on the branch pipe. Ensure the drill bit does not tilt during drilling, and the depth should not exceed 1/2 of the pipe diameter; then press the bypass into the branch pipe.

Cut the product slightly longer than the length of the plant rows, arrange it along the plant rows, and then connect one end to the bypass.

6. The dripper tape installation is complete. Open the valve to flush the pipeline with water, then close the valve; attach the end cap to the end of the product; install the branch pipe cap at the end of the branch pipe.

The installation sequence for the entire drip irrigation system is as follows: valve, filter, straight-through, branch pipe, drilling, bypass, drip tape, flushing pipe, and plug.

Drip tape installation saves water, reduces fertilizer usage, and minimizes labor, benefiting soil quality improvement. The quality of installation directly affects the final outcome, so it is crucial to carefully review the requirements during installation to avoid various issues later on.