1. The product has front and back sides, and during the tenting process, the side with the liquid facing down should be used.

2. The liquid attached to the surface of the greenhouse film is a defogging and droplet agent. Appropriate protective measures should be taken before and after covering the greenhouse to prevent excessive contact and friction on areas such as the hoop structure or wire, to avoid damaging the coating and affecting the defogging and droplet performance.

3. Ensure the greenhouse is installed before the ground freezes, preferably on a sunny day. After installation, leave the large air vents open for ventilation for 1-2 days. Close the vents once the fog and dripping liquid have fully dried.