How to Apply All-Purpose Adhesive Effectively? Linyi All-Purpose Adhesive is a household name, widely used in our daily lives. Its adhesive properties, combined with its ease of use, make it accessible to almost anyone. When our shoes start to come apart, a little bit of all-purpose adhesive can fix the problem, saving money and providing convenience. However, sometimes the bonding isn't ideal, and the adhesive may be applied too thinly or too thickly. Too little adhesive won't hold, while too much can affect the appearance. Besides affecting the look, what other issues can a thick application of all-purpose adhesive cause? Below, the all-purpose adhesive manufacturer will introduce these issues. When the adhesive is too thick, it dries slowly and has poor adhesion. This is because the adhesive's viscosity (workability) is greatly affected by temperature; the lower the temperature, the lower the viscosity, making it difficult to apply evenly and can result in a thicker layer. The solvent on the adhesive surface evaporates, forming a film that feels dry to the touch, but is actually not fully dried. If bonding occurs at this stage, it will lead to sticking, stringing, and popping off, among other chain reactions. This explains why some items may bond well initially but later fall off. This is all due to the thick application of adhesive that hasn't fully dried. Therefore, when applying all-purpose adhesive, it's best to apply it thinly and evenly, ensuring complete drying. It's important to maintain a bonding surface temperature of around 38℃ for optimal results.