One, clean格栅渣按照规定时间。 During the flood season, increase the frequency of cleaning to ensure the smooth flow of water. Should any malfunction be detected by the monitoring equipment while the格栅cleaning machine is in operation, the operation must be stopped immediately for timely repair.

In the sump and discharge areas, equipment maintenance typically involves inspecting and adjusting the pump seals immersed in lubricant every six months. Regular checks and maintenance should also be conducted on the float level gauge of the collection pond and its conversion device.

Three: Regular maintenance of pumps includes scheduled inspections, adjustments, or replacements of pump inlets and outlets. Regularly check the water level gauge and conversion equipment of the elevated water tank. To ensure the backup pump operates normally, it's generally recommended to conduct a trial run once a month. When the temperature falls below 0°C...

When necessary, water inside the pump casing should be drained promptly.

Four: Maintenance and Care of Fans - Fans without oil or insufficient oil are strictly prohibited from operation. Oil lubrication status must be checked before startup. Regular inspections should be conducted, and in case of any anomalies, immediate shutdown and thorough examination are required. Pay attention to the lubrication of all bearings and the pipelines for water cooling and air cooling.

Routine maintenance checks are typically conducted every three months.

Section 5: Maintenance of the Aeration Sedimentation Tank

Monthly adjustment of the sand-suction machine's limit device to ensure smooth operation of the sand discharge pipe, drainage channel, and sand-water separator. Maintain hygiene of the sedimentation pond and related equipment as well as their respective components.