What are the construction requirements for construction site packaging boxes? Besides the construction team, let's understand the construction requirements for packaging box construction on the construction site.

Ensure that the connecting bolts between parts are securely tightened.

2. Grey Line Layout: Measure based on the location shown on the residential area floor plan.

Bolts should be installed correctly according to the design requirements, with washers properly laid and mandatorily installed.

4. The installation locations of all parts of the on-site container must comply with design requirements, and the welding areas must be accurate without any temporary welds.

5. During on-site welding and transportation, areas where the undercoat has peeled should be re-coated with anti-rust paint. Apply two layers of topcoat to the exposed parts of the components. No paint leakage, peeling, or rusting is permitted.

6. The packing box office and walls must be modified according to the layout diagram. The corners and outer edges of the canopy walls are sealed with square aluminum, and the connections between panels are made with T-shaped aluminum. Each wall is vertical, with consistent embedding depth, and must be cleaned meticulously.