What exactly are Larsen sheet pile supports, many netizens ask. Let's find out what sheet pile supports are below.

In foundation pits over five meters deep, steel sheet piles are used for support. They can provide continuous support. The sheet pile design is similar to that of U-shaped steel but wider and deeper. Its cross-section is approximately trapezoidal.

The sheet thickness is approximately 25 millimeters (standard unknown). We measure the thickness with our own hands, with a width of about 3 meters, generally ranging from 6 to 9 meters. Particularly, some exceed 12 meters. During support, first position and install the production line, then press a positioning pile into place using a vibratory pile driver or excavator. Subsequent piles will bend outward in both clockwise and counterclockwise directions, following the laying line. As they enter the ground, Larsen steel sheet piles form an effective support for the foundation pit wall.