We often see some road damage, primarily caused by the detachment of ceramic particles. What are the specific reasons for this?

1. The surface was not adequately dry. Prior to applying the anti-slip ceramic granules, it is essential to ensure the surface is dry. Hot compressed air driers can be used for moist surfaces, especially in winter, where heating the surface is necessary to accelerate the resin condensation.

2. The ceramic particle adhesive has poor quality.

3. Ceramic granule road surface overweight. As ceramic granule road surfaces typically have weight restrictions, frequent passage of overweight trucks can easily lead to granule loss.

4. The adhesive usage for ceramic granules is insufficient. The adhesive ratio for the colored anti-slip road ceramic granules is too low, resulting in the ceramic granules not being adequately coated with adhesive.

Through the above introduction, we hope you now have a better understanding of the causes of shedding. If you have any further questions, feel free to contact us!