The installation and commissioning of the tooth roller crusher is a crucial step to ensure its proper operation and crushing capability. The specific process includes:

Foundation Construction: Select the appropriate foundation construction method based on the model and specifications of the equipment. Ensure the foundation is level, sturdy, and meets the equipment's requirements.

Equipment Installation: Place the tooth roller crusher at the designated location and secure all components. Pay attention to ensure that the fit and clearance between the components meet the requirements.

Transmission Device Calibration: Calibrate the transmission device to ensure correct and tight connections between components such as the motor, reducer, and drive shaft. Check the motor's direction and the smooth operation of the reducer.

Adjustment Device Calibration: Calibrate the adjustment device to ensure the spacing between the roller teeth can be adjusted. Modify the discharge particle size as required and check the flexibility and reliability of the adjustment device.

Empty Run Test: After the installation and debugging of the equipment is completed, an empty run test should be conducted. Check if all components are operating normally and if there are any abnormal sounds or vibrations. In case of any anomalies, the machine should be stopped immediately for inspection and troubleshooting.

Load Testing: After the empty load test is passed, proceed with the load test. Add an appropriate amount of material for crushing operations, and inspect if the equipment's production capacity, crushing effect, and energy consumption meet the design requirements.