Manufacturer selling C6136 standard lathe for student internships and general lathe use

Model C6136

Host Specifications - Center Height: 180mm

Swivel diameter on bed: 360mm

Workpiece rotation diameter on the tool holder: 190mm

Swivel Diameter Inside Saddle Groove - 540mm

Saddle Effective Length in Front of Flower Tray - 200mm

Bar stock diameter 50mm

Bore diameter of main shaft: 52mm

Countersunk MT6

Speed 50HZ (60HZ) 25-1600 rpm, both clockwise and counterclockwise, in 12 different speeds

Carriage lateral travel 240mm

Small knife holder stroke: 140mm

Vertical scale value 0.5mm per division / 100mm per revolution

0.05mm per division, 4mm per revolution

Small Knife Holder Graduation: 0.05mm per division, 3mm per revolution

Swivel range of knife holder: 45 degrees

Distance from spindle centerline to tool support face: 22mm

Bar Section Size (Height x Width): 20mm x 20mm

Feed Rate 0.039～1.05 mm/r  44 types

Feed rate per revolution: 0.019～0.52 mm/r, 44 types

Centerline of spindle to side of square tool holder: 205 mm

Tailstock Tip bushing internal cone, MT4

Top-grade sleeve movement: 130mm

±10mm lateral movement

Metric thread 0.45～20 mm/r, 30 types

British Standard 80-1 n/1" in 35 sizes

Module 0.25～10 mm, 25 types

Pitch 160-3 DP, 30 types

Main Motor YD132M-8/4 B5 TH 3/4 KW

Main motor speed: 50HZ (60HZ) 750/1500 rpm

Cooling Pump Motor AYB-20TH 0.115 KW

Belts - Main Drive V-Belt Type and Specifications: A - 1900 mm