Tempered Glass Edging Machine

The Xiangtian Glass Straight双边Edge Grinder is a CNC-type flat glass deep-processing machine. This series integrates rough grinding, fine grinding, and polishing into one, capable of finishing the grinding and polishing of two straight edges and the upper and lower edges of flat glass in a single processing. It can also be equipped with a descaling device or a safety chamfering device according to customer requirements. The machine employs an air-assisted polishing system for stable polishing performance. The glass grinding width is adjusted by a ball screw and measured by an encoder. It utilizes a PLC control system, allowing various processing parameters to be set on the human-machine interface, saving time and effort with high automation.

The Xiangtian Glass Straight Edge Beveling Machine features a chainless bearing roller chain structure, with a grinding head that can be raised and lowered. It is designed for the bevel and bottom edges of flat glass or mirrors, including 2 DB362 bottom edge rounding wheels—one for coarse grinding and one for polishing. This series of machines has a wide processing range, capable of grinding small glasses as small as 25mm x 25mm (1'' x 1''), with larger bevel processing widths up to 50mm (2''). The control system uses PLC control, allowing for automatic and manual switching, with a clear human-machine interface displaying glass thickness, bevel width and angle, remaining glass thickness, and processing speed, among other parameters. Inputting and modifying parameters are intuitive and convenient, with a high degree of automation. The conveyor speed is variable. The machine can be used for mold modification, and it is equipped with an automatic back panel cleaning device.

The Xiangtian glass straight edge grinding machine utilizes a chainless bearing roller chain structure for smooth transmission. It is suitable for the grinding and polishing of the bottom and edge of various flat glass panels. The edge polishing uses a wool wheel for high brightness finish. The control system employs PLC control, allowing for automatic and manual switching. The human-machine interface clearly displays parameters such as glass thickness, processing speed, and machine edge angle, with intuitive and convenient input and modification of parameters, and high automation. The conveyor speed uses variable frequency speed control, and the main drive motor is a variable frequency motor. It can be used for trimming the back panel on-site, and is equipped with an automatic back panel cleaning device. The conveying guide rail is adjustable for height, facilitating the adjustment of glass cutting volume.