Resin shingles are a type of rigid decorative material used for roofing, featuring various shapes. Here is a detailed introduction to them.
Resin tiles are primarily made from polyvinyl chloride resin or inorganic fillers, with other additives as the matrix. The surface layer is coated with weather-resistant acrylic resins, and are formed through extrusion or lamination. They can also be reinforced with materials like steel wire or fiber mesh to enhance mechanical properties.
ColorfastThe surface material is made from imported ultra-high weatherability engineering resin, boasting exceptional durability in natural environments. It maintains color stability even when exposed to harsh conditions such as ultraviolet rays, moisture, heat, and cold for extended periods. Field results from regions with intense sunlight exposure, such as in Arizona and Florida, USA, prove that it ensures a color change of δe≤5 over ten years.
Lightweight and durableSynthetic resin tiles are chemical products, extremely lightweight, easy to install, and also reduce the load-bearing capacity of the building.
Anti-LoadWith excellent load-bearing capacity, even in regions with low temperatures where roofs are covered with snow year-round, there is no surface damage or cracking. Tests have shown that under a support spacing of 660mm, a load of 150kg does not cause any cracking or damage to the tiles.
Excellent sound insulationUnder the influence of external noise such as heavy rain and strong winds, it exhibits excellent noise absorption properties.
Excellent corrosion resistanceResistant to corrosion from various chemicals such as acids, alkalis, and salts, suitable for use in areas prone to acid rain and coastal regions.
Excellent fire-resistant propertiesThis material belongs to flame-retardant category, having passed the fire resistance test by the national fire protection authority in accordance with the GB 8624-2006 standard, with a fire resistance performance of ≥ B1 level.
Impact ResistanceThe product boasts strong resistance to external impacts. Tests have shown that a 1-kilogram steel ball dropped from a height of 3 meters does not crack, and its impact resistance is also remarkable under low temperatures.
Self-cleaning performance enhancedThe surface is dense and smooth with a "Lotus Leaf Effect," making it difficult to attract dust. After a rain, it remains as clean as new. The tiles' surface dirt is washed away without leaving spots, and it is also less prone to snow accumulation, reducing the risk of collapse due to excessive snow load.
Volume StableThe coefficient of expansion is 4.93×10-5 mm/mm/°C, and the tiles exhibit bidirectional tensile properties in their geometric shape. Even with significant temperature changes, the tiles can absorb their own expansion and contraction, ensuring stable geometric dimensions.
Waterproof PerformanceThe high-humidity-resistant resin chosen is inherently dense and non-absorbent, eliminating issues with microporous water seepage. Additionally, the product width is 45% wider than traditional tiles, resulting in fewer roof joints, thereby significantly enhancing the waterproofing performance compared to traditional tiles.
Insulation PerformanceOur insulating products remain intact and undamaged even in the event of accidental discharge.
Insulation performanceThermal conductivity is 0.325 W/m·K, approximately 1/310 of clay tiles, 1/5 of cement tiles, and 1/2000 of 0.5mm thick color steel sheets.
Quick InstallationLightweight and with a wide range of accessories, it's easy to install and dismantle; with an effective width of 960mm, it offers higher and more cost-effective installation efficiency than competitors' 720mm wide composite resin tiles.
Green Eco-FriendlyAsbestos-free and radioactivity-free, recyclable, fully compliant with green environmental protection standards.
Standard thickness: 3.0mm, length custom-made in multiples of pitch, available colors include drunken jujube red, grayish blue, matte gray, dark green, ocean blue, etc. Total width: 1050mm, effective width: 960mm, wave pitch: 160mm, wave height: 30mm, pitch: 219mm.
Primarily applied to "Flat-to-Roof" projects, mobile homes, villas, ancient-style architecture, gardens, pavilions, factories, mountain resorts, residential developments, awnings, and sunshades, etc.
Main Vault InstallationInstall in reverse direction based on local wind direction, overlap a wave seam, working simultaneously on both sides.
Rafter InstallationDuring the installation of the ridge tiles, a section of a ridge tile should be cut off before attaching. The junctions where the ridge and slope tiles are installed should be sawn neatly. After the ridge and slope tiles are installed, then proceed to install the three-way tiles.
Fixed Components UsageFasteners are for accessories. When installing, first drill holes using an electric drill; the diameter should be 2mm larger than the hook bolt screw. Self-tapping screws with a diameter of 6.3mm are recommended.
通过中商114认证 
