As summer approaches, some factories and workshops experience a sudden rise in temperature, even with air conditioning running, the effect is not very satisfactory. Roof insulation then comes into view. So, what should we pay attention to when aiming for effective roof insulation? Let Shandong Yushun guide you through it below.

Before conducting roof insulation and heat preservation work, we should first inspect the lower condition of the roof to ensure it is in normal state, while ensuring the roof is level, dry, free of cracks, particles, holes, and any other factors that may affect the bonding of the roof's insulation and waterproofing system. If the roof condition does not meet the requirements, appropriate measures should be taken before proceeding with the construction.

In addition to inspecting the roof condition, some preliminary treatment should be done to the roof base. Protect unnecessary waterproof areas, brush off dust and loose debris from the roof, and for sludge-like attachments, use a scraper for cleaning to ensure the roof is clean and smooth. The treated roof should meet the following requirements:

1) The roof must be flat and compact, with no looseness or honeycomb-like surfaces.

2) The roof must be clean and tidy, free from dust, grease, or any other debris that may affect the construction process.

3) The lower layer must meet the strength requirements of the national standard design documents, while ensuring a moisture content of less than ten percent, otherwise it may cause construction difficulties in the future.