What to note when using silicon rubber rollers? The usage of rollers is related to the material they are made of, and proper usage of good quality rollers can effectively extend their lifespan.

      1During startup heating, check if the silicone roller is operating normally and if there are any jamming issues. When shutting down, pay attention to any abnormalities in the set residual heat, and do not turn off directly (the residual heat is generally set to...)40－50Minutes are suitable.

      2In the event of a power outage or any other cause leading to an abrupt shutdown during machine operation, immediately put on gloves, rotate the rubber roller while removing it, and perform heat dissipation as soon as possible.

      3When replacing the silicone on the roller, lock it only after the silicone has been heated to the required temperature.

      4Ensure the surface of the silicone roller is clean. If there are stains, use a cloth strip and industrial alcohol for wiping. For severe contamination, sandpaper can be used to scrub.

      5Silicone rollers, like other printing roller types, should not be bumped or squeezed against hard objects (such as wrenches) during use or storage.

      6Silicone temperature is generally...190Maintain a moderate pressure and temperature for the silicone roller during the transfer process, ensuring the product transfer is up to standard.

      Before the installation of polyurethane roller, it is necessary to properly lubricate the various components to reduce the friction caused by the inking roller between them. Additionally, the polyurethane roller bearings should be replaced promptly after a period of use to avoid affecting work efficiency and incurring losses.