Integrated Water Purification System

Zhenyuan Series Chlorine Dioxide Generator Performance Features                                                                                                                                                                                    

ØTo adequately extend the reaction time of raw materials, enhance the chlorine dioxide content, and improve the conversion rate of raw materials, domestic counterparts in the industry use a five-stage reactor, with the raw materials reacting in the reactor for1.95Hourly, Total Raw Material Conversion Rate ≥90Chlorine dioxide accounts for a portion of the total available chlorine.70－80％。

ØDomestic dry heating methods feature fast temperature rise and low power consumption, resulting in significant energy savings compared to industry-standard products..

ØDomestic direct measurement reactors actually measure the internal reaction temperature, not the medium temperature. Temperature control:45℃-50℃。

ØDual temperature control system designed for large-scale equipment, maintaining a high raw material conversion rate for use in cold regions.

ØThe use of a residue separator device can enhance the suitability for drinking water.

ØThe raw material feeding is equipped with an imported electromagnetic metering pump, which operates stably, ensuring accurate and reliable measurement.

ØThe reactor inside the equipment is made of high-temperature and corrosion-resistant synthetic metal materials or pure titanium, ensuring a long service life for the equipment.10Over one year.

ØIndependently developed and produced chlorine dioxide generator controller, integrating temperature control, frequency adjustment, flow control, residual chlorine control, and logical control into one, making the equipment more user-friendly and convenient for customer selection.

ØTemperature control is employedPIDTechnology, temperature control. Set temperature cut-off function to prevent temperature from going out of control and causing losses.

ØThe controller features logical control functions: the equipment can only start heating and operate normally when the power hydraulic pressure and two liquid level conditions are met.

ØOperation: The specially designed explosion-proof device features a reversible function, which can effectively release excessive pressure inside the reactor and quickly restore itself.

ØBased on user selection, meet requirements20Tanks for raw materials with storage time of one day or more; continuous level measurement for large raw material tanks is configurable, and remote transmission is achievable.

ØEase the automation of equipment operation processes. Extremely easy to implement联动 control with the equipment you require.

ØA sound installation ensures the absence of chlorine dioxide or corrosive gases indoors, with no noise and gas leakage pollution.

Detailed description of performance features:

1.Sodium chlorateNaClO3) and hydrochloric acid (concentration ≥31The product is a composite disinfectant primarily for chlorine dioxide and secondarily for chlorine gas, with (%) as the raw material.

2.Zhenyuan Equipment fully utilizes the working principle of vacuum generated by water jet nozzles. The reactor inside the equipment is always under negative pressure, and due to the entry of air, the raw materials are continuously aerated. The chlorine dioxide gas produced in each reactor is continuously extracted, resulting in higher levels of chlorine dioxide, calculated by effective chlorine.ClO2Concentration greater than70。

3.To adequately extend the raw material reaction time and enhance the chlorine dioxide content and raw material conversion rate, the equipment employs a five-stage segmented reactor, with a production yield of ≥90Chlorine dioxide accounts for a portion of the total effective chlorine.70－80％。

4.Domestic five-grade reactor, raw material residence time in the reactor reaches1.95Hours, to ensure that the raw materials are fully reacted within the reactor, thereby guaranteeing a high yield of the reaction.90Above.

5.Five-stage reactor mechanism: Sodium chlorate and hydrochloric acid react at room temperature, producing a large amount of chlorine dioxide gas with a low raw material conversion rate. Therefore, the first four stages of reaction can fully extract a large amount of chlorine dioxide gas. Starting with the fifth stage, heat is applied to ensure the raw materials react completely. At this point, there is more chlorine gas and less chlorine dioxide, which can ensure an increase in raw material conversion rate and a higher proportion of effective chlorine in chlorine dioxide.

6.The equipment employs dual-temperature control technology to enhance raw material conversion rates, capable of increasing the conversion rate of raw materials by75Above. The specific method involves using a water bath heating for the first four reactors, heating to30～40°C, the fifth level uses dry heating up to45～50℃。

7.The equipment features an additional residual liquid treatment system, which can expel the small amount of unreacted residues.

8.Due to the full reaction of the raw materials, the chlorate content in the disinfected water body is significantly reduced, meeting the national drinking water standards: chlorates below0.7ppm。

Automatic temperature control, temperature regulation45-50The equipment utilizes a combination heating system with water bath heating as the primary method and external air heating as the auxiliary. Currently, domestic hypochlorous acid generators all adopt the external air blowing-off process, where the hypochlorous acid generated by the reaction liquid is blown off and absorbed by a water jet to produce a disinfectant solution. However, this process has a flaw: the actual temperature inside the reaction chamber does not reach the required reaction temperature. Due to the operation of the equipment,(Especially during the winter)Outdoor temperatures are generally0Below °C, during the blowing-off process, the outdoor cold air significantly lowers the temperature of the reaction liquid in the reactor, preventing the reactor from reaching the required temperature and greatly reducing the conversion rate of the feedstock. In response to this actual usage scenario, our company has innovated through technology, adding air-assisted heating at the intake of the equipment to heat the cold air before blowing-off, thereby avoiding the aforementioned issues. This air-assisted heating can achieve automatic temperature control, ensuring that the air blown into the process remains at a constant temperature regardless of the outdoor temperature.40℃, which ensures the reaction temperature inside the reactor, maintaining a constant reaction temperature throughout the year. This is a highlight and unique feature of our generator compared to similar products. This technology has been applied for a national invention patent by our company. Additionally, due to the rapid heat exchange in the reaction vessel, it significantly reduces the lifespan of the reactor. This device effectively overcomes...