Customized Full-Automatic Rendering Mortar Equipment: Rendering plaster has the same lifespan as buildings and can be crushed together with gypsum blocks after disposal, regaining its setting properties after low-temperature calcination for reuse. The density of three-cycle rendering plaster is 850-950 kg/m³, only half of the traditional cement rendering mortar's 1800-2000 kg/m³. For instance, if a building with two units and 20 floors switches from traditional cement mortar to rendering plaster, the entire structure will reduce its load by 550 tons. This effectively reduces the building's load.

Turn on the filling machine control cabinet switch, then press the start switch on the computer monitor to begin filling. Once the uniformity of the mixture is achieved, open the finished product storage bin and then activate the pneumatic discharge door of the mixer. Begin to uniformly and orderly add materials. After adding, first start the mixer, then open the storage bin discharge door for the next batch of materials. Close the discharge door after the materials enter the mixer for the next batch's addition.

Gypsum plaster is a finished product made by mixing high-purity anhydrite gypsum as the main binder, with appropriate amounts of admixtures and inorganic light aggregates, pre-mixed in a factory. It can widely replace traditional cement mortar leveling and is used for plaster leveling of interior walls and floors in dry areas of buildings. The content of gypsum in the plaster mortar product must not be less than 75% (by weight). Application instructions for gypsum plaster mortar.