4-inch diesel water pumpThe pump shaft of a diesel engine pump should be installed according to the steps for the first time, and attention should be paid to avoiding the breakage of the shaft neck thread during use. The rolling bearing of a diesel engine pump is also a fragile component, with a normal service life of less than one year. However, if it is not installed in a standardized manner or maintained properly, it is easy to die prematurely. Replacement is also quite troublesome, requiring the entire bearing to be replaced. Therefore, daily maintenance cannot be taken lightly. In addition, the mouth ring is also a consumable component of diesel engine pumps.
4-inch diesel water pumpThe diesel engine pump itself is a powerful helper for treating water, but daily maintenance requires that the components must be waterproof and rust proof. In the transportation machinery industry, diesel engine pumps that appear to have weak components are actually worth maintaining in order to maximize their efficiency. The casing of the water pump is prone to oxidation after prolonged use, so it is important to remove the embroidery in the early stage. And traces will appear when subjected to various external forces. If water accumulates during winter, it will freeze and cause the pump casing to crack. If these problems are not prevented in advance, it will increase the maintenance cost of the diesel engine pump casing.
Product Model: TO-40EW
Inlet diameter:100MM
Outlet diameter:100MM
standard flow ： 100m3/h(Every hour)100cubic meter
traffic ： 110m3/h
head ： 25M
suction lift ： 8M
rated speed ： 3600rpm
fuel consumption ： 245g/kw.h
Power model ： ET1V86F(Alevel)
Engine type Single cylinder, four stroke, diesel engine
boreXitinerary ： 88*75
displacement ： 500CC
rated power ： 5KW
Using fuel ： diesel
cooling method ： forced air cooling
lubrication system ： Splash type, forced lubrication
Engine oil capacity ： 1.65L
Fuel tank capacity ： 10L
Startup method ： Hand start
net heavy ： 60kilogram
Overall dimensions ： 650*480*600MM
