Textile fiber dust treatment LCDM type long bag offline pulse bag dust collector
1、 Product Introduction:
The dust in textile factories is usually referred to as fiber dust or cotton dust, wool dust, hemp dust, etc. The fine dust emitted by textile factories into the air generally ranges in size from 0.1 to 100 μ m. From a hygiene perspective, "inhalable dust" smaller than 10 μ m is the target of prevention and control. The development and operation of the LCMD long bag offline pulse bag dust collector has accumulated the wisdom of numerous industry experts, and many technical personnel in the company have devoted a lot of effort. The addition of dust collector functions based on the characteristics and operational requirements of flue gas, such as low pressure, offline dust cleaning, non-stop maintenance, and protection technologies, has gradually demonstrated its superiority and has been increasingly recognized and praised by design institutes.
2、 The working principle of LCDM type long bag offline pulse bag dust collector:
The design structure of LCMD type low-voltage long bag offline pulse bag dust collector adoptsupAir intake method, dusty gas is supplied byUpper partEntering the dust collector, the dust guide system set at the air inlet has the functions of separating large particles of dust in the dusty gas and guiding and homogenizing the dusty gas.
1. When the dusty gas passes through the diversion system, due to the sudden decrease in wind speed, the large particles of dust in the dusty gas naturally settle and are directly separated by the diversion systemAfter passing through the filter bagFalling into the ash hopper, the remaining dust is guided by the diversion system and enters the filtering area of the box with the airflow.
2. The filtering area of the pulse bag filter boxupThe filter bag component of the dust collector is equipped with a flower board and utilizes springstabletingSealed connection with the flower board to form a clean gas area（Filter area）Areas with dusty gases（Intake chamber）The separation. Flower board is also a dust collectorMechanical extrusionA work platform for maintenance and replacement.
3、 Design concept:
In the design process of this dust removal equipment, we particularly emphasize segmented and modular design, and analyze the similarities and differences between this project and other projects based on the design and operation experience of a large number of similar projects in the past. If the site allows, we will adopt a modular combination method,windAdjust the number of compartments based on the air volume. Please follow our company website for more information http://www.btshhb.com
