Introduction to desulfurization and denitrification equipment, integrated equipment for flue gas desulfurization, denitrification, and dust removal:

Boiler flue gasIntegrated desulfurization, denitrification, and dust removalThe development of the equipment isUsing inertial collision, condensation, centrifugal force, etctechnologyIt is based on principles, and its specific working principle is that under the power of the induced draft fan configured in the desulfurization and denitrification equipment system, the flue gas dust to be treated falls from a height and impacts the liquid surface at high speed, forming a water mist shape. Most of the particles sink into the water, and under the action of the dust collector splitter, atomized airflow is generated and rapidly rises, further colliding and condensing the liquid droplets to form a water ash mixture material. This water ash mixture is then separated into steam and water through a cyclone impeller, achieving the integrated effect of desulfurization, denitrification, dust removal, and dehydration. Below will be a detailed explanation of the specific workflow of the integrated flue gas desulfurization and denitrification equipment product:

1、 Dust removal process and principle:

Smoke dust removal is achieved through the use of multi tube dust collectors for pre dust removal, followed by the installation of multi-stage wet fine dust removal in the first and second layer water filter water beds. A tubular eddy current fine dust collector can be installed in the top settling chamber to meet the ultra-low dust emission requirements of the environmental protection department for the owner.

2、 Process and principle of flue gas desulfurization:

Flue gas desulfurization is based on the principle of acid-base neutralization, using alkaline agents to neutralize and absorb sulfur dioxide.

You can choose from: 1. Sodium alkali method 2. Double alkali method 3. Magnesium oxide method.

3、 Process and principle of flue gas denitrification:

The flue gas denitrification equipment adopts a network method to ensure low operating costs for denitrification.Efficiently absorb nitrogen oxides using a chelating agent solution, and expel the chelating solution that has fully absorbed nitrogen oxides from the body. Exclude the chelating solution of the equipment and reduce nitrogen oxides in the external reduction reaction tank by adding a reducing agent to generate nitrogen gas; Regenerate some chelating agents while reducing nitrogen oxides to reduce dosage and operating costs.

4、 Operation and usage instructions for integrated equipment for flue gas desulfurization, denitrification, and dust removal:

1. Operators must undergo professional training before they can operate on duty.

2. Before operation, the equipment should be inspected to ensure that all components are functioning properly.

3. Before starting up, it is necessary to check that the pH value of the liquid in the circulation pool is not lower than 10.

4. When starting up, the water pump should be started first to ensure the normal operation of the circulation system, and then the induced draft fan should be turned on.

5. When shutting down, the induced draft fan should be turned off first, and then the circulating water pump should be turned off.

6. The sediment in the pool should be cleaned regularly to ensure that the circulating water meets the requirements.

7. Each shift must add desulfurizer to the circulation pool as required and conduct pH testing with test paper.

8. Each shift must fill out operation records and records of the amount of desulfurizer added.

9. Operators should pay attention to self-protection to avoid burns from desulfurizers. For more desulfurization and denitrification equipment, please follow our company website http://www.btshhb.com