Product manual introduction of 10000 wind capacity filter cartridge dust collector:

The filter cartridge dust collector is a filtering and dust removal device that uses a filter cartridge as the filtering unit or pulse blowing. The LTMC type filter cartridge dust collector produced by Hebei Shiheng Dust Removal Equipment Co., Ltd. belongs to the pulse filter cartridge dust collector. Below, we will introduce the structure and working principle of the pulse filter cartridge dust collector:

1. The structural composition of a filter cartridge dust collector:

The structure of LTMC pulse filter cartridge dust collector equipment consists of six parts: upper box, ash hopper, ladder platform, bracket, pulse cleaning and ash discharge device.

2. Working principle of filter cartridge dust collector

LTMC pulse filter cartridge dust collectorUnder the action of the main fan in the dust removal system, the dust containing gas enters the lower air inlet of the filter cartridge dust collector and enters the gas box at the bottom of the dust collector. The dust containing gas is pre treated in the gas box, and then enters the various dust removal compartments of the upper box from the bottom gas box. The particulate dust will adsorb on the outer surface of the filter cartridge of the filter cartridge dust collector. The filtered clean gas will pass through the filter cartridge and enter the clean air chamber of the upper box, where it will be collected at the outlet and discharged outdoors.

As the dust filtration process continues, the accumulation of dust on the outer surface of the filter cartridge will increase, and the increase in dust accumulation will correspondingly increase the operating resistance of the equipment. In order to ensure the normal operation of the dust removal equipment system, the upper limit of the operating resistance of the filter cartridge dust collector should be maintained within the range of 1400-1600Pa. When this limit is exceeded, the PLC pulse automatic controller should issue commands through the dust removal system to perform three state dust cleaning. 

3. Filter cartridge dust collectorApplicable application areas:

Pulse type filter cartridge dust collectorIt is a novel and efficient dry filter cartridge dust removal equipment developed by our company's technical department based on the advantages of similar products at home and abroad, and has been put into production. Due to its many advantages, it is widely used for dust removal in various industrial fields such as casting, metallurgy, machinery, chemical industry, cement, building materials, grain, medicine, etc. It can also recover useful dust and purify the air. This dust removal equipment is an essential basic waste gas treatment facility for industrial production to remove pollution, protect the environment, and improve the working conditions of employees.